Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 22 / 162
Posts with their shortened content
RE: Bosch CS5800i 5kW - Experience So Far  

By Judith, 3 days ago

  I’ve been reading to find out about the Bosch and you’re learning fast. Just for info our Vaillant is giving a cop of 5-6 in this mild weather. Our design is for 42C at -2C, but I can’t see the presen...
RE: Out & About: Events Hub  

By ASHP-BOBBA, 4 days ago

  I signed up for this, I think it will be a good one. Always looking to learn me 🙂  
Transparent RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?  

By Transparent, 4 days ago

  @mairia - if you want to try following the discussion about the buffer tank, there are two previous topics with diagrams to help. See this one about 4-port buffers,and here where Mars uses his artisti...
Majordennisbloodnok RE: Bosch CS5800i 5kW - Experience So Far  

By Majordennisbloodnok, 4 days ago

  Have you ever heard of Warnock’s Dilemma? My guess is that it applies here because you’ve said all that needs to be said. A good job comprehensively chronicled. Well done.
cathodeRay RE: Heat Loss v Outside Air Temperature  

By cathodeRay, 4 days ago

  Ideal conditions to collect the data! Although the left hand side of the scatter plot will be empty, the right hand side should be nine and tight, increasing confidence in the result.
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?  

By MairiA, 4 days ago

  @transparent yes it's an air vent. The side wall of the integrated garage there is an external wall. The rear and opposite side walls are shared with rooms in the house. Would you recommend doing anyt...
Polar bear RE: My DIY Heat Pump installation  

By Polar bear, 4 days ago

  @majordennisbloodnok The 'more' button takes me to Setting/schedule/advance/version It is the Advance that takes me to a password page....that's when I panic!  
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?  

By JamesPa, 4 days ago

  Well spotted. However if there isnt a secondary water pump, which OP seems to believe there is not, there can be no buffer - or at least not one of the configuration usually deployed in the UK (ie 4 ...
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?  

By JamesPa, 4 days ago

  OK that shows its working as programmed so nothing broken or misconfigured. Of course 'correct' is an interesting term which can mean either 'corresponds to design' or 'delivers the right outcome'. ...
Transparent RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?  

By Transparent, 4 days ago

  The buffer tank is beneath the DHW tank. The DHW section has a brass drain-valve facing us. The blue-handled lever valve is on a pipe which seems to enter the buffer section,which suggests it is actua...
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?  

By MairiA, 4 days ago

  @jamespa yes that all makes sense, a really useful plan. I'll cancel the setback now as I see increasingly cold weather forecast, -1 overnight and light snow next week!
Page 22 / 162

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO