Recent Posts

| Forums | Topics

Page 43 / 60 Prev Next

Posts with their shortened content
	RE: Ecodan EMP2 kit - is it any good? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba Thanks. From reading the document, it would seem that the packs were to provide accurate information for grants or housing associations rather than for the homeowner looking to monitor the...
	RE: DHW SET UP with Samsung gen 5 By DerekDeLeon, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	[/quote] I am only trying to help based on the info you have previously written. Regarding your suggestion for FSV 3052 , it is just a timer to ensure that the forced DHW setting (expensive) can't...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 Hi, I don't actually know if they replace the data or if you get 3 sets of data from the app, Mitsi claim its more accurate but i think what is most important is the meters are MID compl...
	RE: Ecodan EMP2 kit - is it any good? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba Thank you for your response. Do the meters actually provide new data or simply replace the existing calculated energy consumed data with more accurate data. ie the new data would then be p...
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@bart How you getting on with yours now?
	RE: Air Changes per Hour - ACH and the MCS requirement By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa I love going on the tools, I did it yesterday, the engineers just look at me and smile like I should get back in the van lol. Last year I worked with our HP engineer for 6 months solid, offic...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 They are 2 electric meters that are more accurate than the general data on the melcloud, they also interface with your FTC. I have attached a link to show you all of the options, I have...
	RE: Ecodan EMP2 kit - is it any good? By Mars, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba should know the answer to this...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Cheap time is 4 to 7am yeah? I have it programmed for 4to 5 for DHW, manually on controller but not happening . As I wait for pcb’s I’ll try it again . could it be something to with FSV settings as th...
	RE: DHW SET UP with Samsung gen 5 By DerekDeLeon, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@alfapat An odd number of available timeslots.....that's hilarious, only in Korea 🤣 🤣 The on time at 0300 is only an hour away from the cosy cheap time at 0400 can't it wait an hour...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Still not working . I notice in Daily timing for DHW that there only five slots and I am trying to do 3 cosy on and off timings , which should be 6 slots . However the first time I set up the contro...
	Ecodan EMP2 kit - is it any good? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi. I like to monitor the performance of my Ecodan heat pump and use the app MEL-PUMP. However, I understand that energy monitoring data supplied via MEL-CLOUD is not 100% accurate; comments varying f...