Posted by: @editorSome bad news: Ofgem has announced another energy price rise for October 2024, with further increases expected in January 2025.
There is also some seemingly sneaky stuff going on about the announcement dates. Until very recently, this announcement was generally expected eg on Martin Lewis's Money Saving Expert pages on the 27th August. But a close look at Ofgem's announcement pages including previous ones on the wayback machine shows the wording is by the 27th August, meaning Ofgem can, in effect, announce it whenever they feel like announcing it, so long as it is by the 27th. I can't help wondering whether the early announcement will catch some suppliers and more importantly for us consumers with their pants down, in particular over fixed term/tariff contracts.
Midea 14kW (for now...) ASHP heating both building and DHW
I've just fixed for 12 months at 21.4p p /kWh with Outfox the Market:
Mitsubishi Ecodan 14kw ASHP + 500l Cylinder
Posted by: @georgeI've just fixed for 12 months at 21.4p p /kWh with Outfox the Market:
I've just done something similar, slightly different rate as rates are regional. My previous comment came from the fact my sign up to OTM was not straightforward, they got the dates wrong, which meant cancelling the first sign up and doing a completely new second one. I would not have been a happy bunny if by the time I came to do that second application, OTM had hiked the rates, based on an earlier than expected Ofgem announcement. In the event that didn't happen, but I am inclined to presume that when the cap goes up, then sooner or later fixed rates will also go up.
Outfox the Market are an 'interesting' company. A few years ago they had a terrible reputation for customer service, unilateral huge 'seasonal' direct debit hikes, and got known in this and many other parishes as Outfox the Consumer. I think Ofgem may even have stepped in at one point, I bolted before the 5-H-1-T hit the fan. Now, generally, on the websites that publish customer feedback (eg Which?, Citizen's Advice and Trust Pilot but not MSE), they get relatively good customer service scores.
Midea 14kW (for now...) ASHP heating both building and DHW
Posted by: @editorSome bad news: Ofgem has announced another energy price rise for October 2024, with further increases expected in January 2025. It’s now been three years since the gas crisis began. Despite crude oil prices dropping to more “normal” levels, this hasn’t really translated into lower consumer prices for gas and electricity. I’m wondering - how long does it typically take for these cost reductions to work their way through the system? And will we ever see prices drop below 20p/kWh?
Natural gas (or LNG), widely used in the production of electricity in Europe and the UK, isn't a product of crude oil, so the pricing of the two are independent.
See here for a discussion of any price correlation:
https://www.investopedia.com/articles/economics/08/crude-and-gas-prices.asp
Edited to add, products such as bottled propane and butane gas are refined products from crude oil, so there should be a price correlation there for those who use bottled gas.
Samsung 12kW gen6 ASHP with 50L volumiser and all new large radiators. 7.2kWp solar (south facing), Tesla PW3 (13.5kW)
Solar generation completely offsets ASHP usage annually. We no longer burn ~1600L of kerosene annually.
@cathoderay Still, let’s look on the bright side if you have solar PV, look how much more we are saving and shortening that ROI!🤣 Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Posted by: @toodleslet’s look on the bright side if you have solar PV
But not all of us do, listed building, and even if it wasn't listed, the visual impact would not be to my liking. Large futuristic rectangular dark coloured panels do not suit mellow small scale cottages in rural settings, and, in the overall scheme of things I do think the visual environment matters. There's been some interesting discussion on the sinking of the yacht Bayesian (don't get me started on the inadvisability of applying anything Bayesian to yachting! Pre and post test likelihood of being afloat after being struck by a tornado!) on the trade off between 'doing the right thing', in this case for safety, and the trade off against amenity, ie enjoyment of the yacht. Similar arguments can apply to the trade off between doing the right thing for the environment, and the impact of doing that right thing on the environment, in particular it aesthetic appeal, enjoyment of which is not only part of what it means to be human, but also strongly conducive to well-being. I do worry sometimes that excess zeal for the former (doing the right thing for the environment) might turn a once green and pleasant land into an endless array of dark satanic mills.
Midea 14kW (for now...) ASHP heating both building and DHW
I don’t suppose your listed building has a slate roof, does it, @cathoderay?
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
Posted by: @majordennisbloodnokI don’t suppose your listed building has a slate roof
No, mellow terracotta coloured conventional clay tiles. There are also gentle curves in places. The walls are also a mellow almost honey coloured sandstone, by brick stands very coarse textured, against which the regular angularity of panels would clash. Good point though, solar panels will be less intrusive on slate roof.
Midea 14kW (for now...) ASHP heating both building and DHW
Posted by: @cathoderayPosted by: @majordennisbloodnokI don’t suppose your listed building has a slate roof
No, mellow terracotta coloured conventional clay tiles. There are also gentle curves in places. The walls are also a mellow almost honey coloured sandstone, by brick stands very coarse textured, against which the regular angularity of panels would clash. Good point though, solar panels will be less intrusive on slate roof.
Actually that wasn’t where I was coming from.
There’s a company in Wales that produces solar panels that are almost indistinguishable from slates.
https://gb-sol.co.uk/products/pv-slate/
It seems they are often able to get approval for use in conservation areas and on listed buildings. Not that it would help you with a tile roof, of course.
Not cheap, though, so I can easily see other products slowly appearing that do the same and look similar for a lower price.
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
Posted by: @cathoderayGood point though, solar panels will be less intrusive on slate roof.
Actually that wasn’t where I was coming from.
But isn't that exactly what you went on to say? Given the right slates and right solar panels, the latter can blend in. As slates are typically more common in wetter parts of the UK, the sheen on the solar panels will even match the sheen on the rain soaked slates!
Midea 14kW (for now...) ASHP heating both building and DHW
Posted by: @cathoderayBut isn't that exactly what you went on to say?
You’re probably quite right. Fair enough.
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
-
Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
2 weeks ago
-
Agile: average import cost vs other tariffs?
3 months ago
-
Switching tariff in Winter? or stick year round?
11 months ago
-
Confusion over Octopus Tariffs
1 year ago
-
Octopus tariffs - API & choosing best tariff
2 years ago
Currently viewing this topic 1 guest.
- 26 Forums
- 2,114 Topics
- 46.4 K Posts
- 45 Online
- 3,410 Members
Join Us!
Latest Posts
-
RE: No-code, plug-and-play monitoring for your heat pump
By Grantmethestrength , 16 hours ago
-
@eliuccio good to hear you’re happy with the install. A...
By Mars , 1 day ago
-
RE: Is this just haze or something more?
I am not a scientist nor a meteorologist and I know the...
By Toodles , 2 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
It will improve performance, but by how much depends on...
By Brendon Uys , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
Said I would pop back with a update. Only Mr Jesus h...
By Burtis , 2 days ago
-
RE: Buffers, hot water and cooling
Thats presumably heat pump DT, what about radiator DT a...
By JamesPa , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Exactly the same here. We now have 13.5kWh ...
By Old_Scientist , 3 days ago
-
Compressor and Evaporator Stratification
I have had a few issues with my Hitachi spilt heatpump ...
By trebor12345 , 3 days ago
-
RE: Wood burner with ASHP - direct air?
This depends on the size of your wood burner and size/t...
By Lucia , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn It's a not a buffer it's a volumiser which is ...
By Lucia , 4 days ago
-
RE: Is your heat pump insured?
To make things clear, lots of insurance companies cover...
By Lucia , 4 days ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 4 days ago
-
RE: Say hello and introduce yourself
Hi @seatonian - Yes, I know Seaton, and I have the Nat...
By Transparent , 5 days ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 5 days ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 1 week ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 1 week ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 1 week ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 1 week ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 1 week ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 1 week ago