Last seen: Apr 16, 2024
@ggw Have you contacted Fogstar? That would be what I would be doing - it seems to be battery related not Sunsynk as we have 2 different Sunsy...
@ggw Silly question, is your time set correctly? I would generally try to diagnose any problems by looking at the inverter itself rather than the...
@robl I don't know about the new Fogstar unit, but the Seplos installation tells you to charge fully and discharge fully to learn the capacity. I ...
You need these to be sequential, Time 5 looks out? So for example: time 1 00:00 20%SOC time 2 01:00 100%SOC USE GRID charge time 3 08:00 20%SO...
Had a thought about the bloated cells (or even new cells) if they compress reasonably okay. I need to buy a fork lift for a warehouse, the replacemen...
I love you @chickenbig 😍 Works lovely now, I've seen that video before, but not while I was trying to fix this issue. Totally not obvious, to me anyw...
@transparent 😀 I had thought about 12v lighting, or even winter heat matting in a future greenhouse. Would need to design for high and low temps, ...
Just as an update to this - I was holding off replying until resolved. I spoke to Ben the owner of Fogstar, who has very generously set me up with a ...
I still don't see an option on Seplos for setting Charge/Discharge current on Bluetooth BMS settings. I'll try to get desktop PC Battery Monitor setu...
Right now I'm having a problem with my 3 Phase Sunsynk using it as an AC-coupled battery system with an existing FIT system (30kWp). I can get it ...
Glad you got that sorted - I did think it would have been that, hence asking for you to post those screens in particular. They are confusing, and the...
Latest Posts
-
@editor another great episode, but same as @phil-bell I...
By Grantmethestrength , 2 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
I have the same unit and controller and it has been a j...
By Grantmethestrength , 3 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@agentgeorge this is a pic of the bleed valve that’s sn...
By AdamK , 5 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@nickhorne Unfortunately not. We take the "normal" IOG ...
By HCas , 5 hours ago
-
RE: Mixture of copper and plastic CH pipework. Will it be ok, or need changing?
In principle yes. Some heat pumps (I think including D...
By JamesPa , 6 hours ago
-
RE: New Fogstar 15.5kWh upright solution
For the common benefit, a quick update on this. Fogs...
By Batpred , 6 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Some of the circuits in my home are not protected by RC...
By Batpred , 6 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@editor I had to deal with E.ON Next while proces...
By TechnoGeek , 8 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Aqara sells some inexpensive hubs (usb dongle size) tha...
By Batpred , 8 hours ago
-
RE: Extend the colder range of the weather compensation curve?
@thebinman In answer to this and personal...
By TechnoGeek , 9 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
And here is what the Homely plots say for the last few ...
By Toodles , 10 hours ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey I’m always watching 👀My Clivet cont...
By Mars , 16 hours ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard That's probably fine, provided as you say...
By GrahamF , 17 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
16Kw AIROSD Manufacturer: Foshan Model: QBKFXFC-...
By Polar bear , 17 hours ago
-
Just a suggestion but upload your images to an AI agent...
By RadWhisperer , 19 hours ago
-
RE: Daikin Wireless Thermostat
The switch from WDC to LWT i.e. pure WC is fairly strai...
By RadWhisperer , 19 hours ago
-
RE: Bosch CS5800i 5kW - Experience So Far
Thank you for your continuous research, and posts. As y...
By ectoplasmosis , 1 day ago
-
RE: Trying to understand my Nibe F1245
@barry-sharp, is this something you could help with?
By Mars , 1 day ago
-
I signed up for this, I think it will be a good one. Al...
By ASHP-BOBBA , 1 day ago
