Activity
 
Notifications
Clear all
Transparent
Transparent
@transparent
Moderator
Illustrious Member
13126 kWhs
Veteran Expert
Joined: Jan 20, 2022
Last seen: Mar 22, 2025
Topics: 15 / Replies: 2284
Reply
RE: Samsung E911 intermittent issue

Have a closer look and see whether these are tight elbows or swept bends. You might also want to view the comparison between smooth bends and ...

3 months ago
Reply
RE: Samsung E911 intermittent issue

We also ought to consider if the flow is being reduced by sharp elbow joints in the pipework. There is a considerable loss of pressure if standard ...

3 months ago
Reply
RE: Smart meter installation – seamless or a potential nightmare?

That's a very useful photo @jancoldIt provides me with heaps of issues which need a comment! 1: The "new" Service Fuse must've been installed by...

3 months ago
Reply
RE: Smart meter installation – seamless or a potential nightmare?

The board on which you have the Service Fuse and Meter shouldn't be used for other equipment. I don't see how a separate (small) consumer unit could...

3 months ago
Reply
RE: Smart meter installation – seamless or a potential nightmare?

The height of a Smart Meter is 175mm including the Communications Hub. It will need at least 60mm below it to accommodate the bend in the tails. ...

3 months ago
Reply
RE: Watch Where Your Installer Fits Motorised Valves

You're contemplating staying cold until Spring?! Is the reason that you can't get your hand to the valve because of the close proximity of the pipes...

3 months ago
Reply
RE: Samsung E911 intermittent issue

Then there's likely to be more air in the pipes somewhere. The amount of air which came out from that bleed position was "a fair bit", but it's limi...

3 months ago
Reply
RE: Samsung E911 intermittent issue

Just before we jump to the conclusion that the pump is effectively "full on", there are occasions when a pump must be put into that mode so that its s...

3 months ago
Reply
RE: Samsung E911 intermittent issue

We could equally well say that "It's the law" for domestic installations...... in that it's a requirement of the Building Regs! But MCS seem to beli...

3 months ago
Reply
RE: Samsung E911 intermittent issue

Oh, I'm all in favour of arrows to illustrate the flow @ashp-bobba... especially if they're different colours. In discussions with Councillors on my...

3 months ago
Reply
RE: Samsung E911 intermittent issue

Oh great!We now have someone else here who can doodle on top of photos 😀 Can I please check @ashp-bobba that my arrow is pointing to the fl...

3 months ago
Reply
RE: Watch Where Your Installer Fits Motorised Valves

Have you got an inspection mirror? This one from Amazon is £4.99 There's a book you need to read called Bodge Buster. And there's als...

3 months ago
Page 32 / 193
Share:

Join Us!

Heat Pump Dramas?

Thinking about installing a heat pump but unsure where to start? Already have one but it’s not performing as expected? Or are you locked in a frustrating dispute with an installer or manufacturer? We’re here to help.

Pre-Installation Planning
Post-Installation Troubleshooting
Performance Optimisation
✅ Complaint Support (Manufacturer & Installer)

👉 Book a one-to-one consultation now.

Latest Posts

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security