Activity
 
Notifications
Clear all
Transparent
Transparent
@transparent
Moderator
Illustrious Member
Joined: Jan 20, 2022
Last seen: Jul 18, 2025
Topics: 16 / Replies: 2415
Reply
RE: My experience with the Selpos Mason DIY kit

Erm... as a contributor here who has neither a Sunsynk inverter nor a Seplos BMS, are you telling us that the inverter assesses the SoC of the attache...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Yes. An ESME device (Electricity Smart Metering Equipment) must have a minimum of five channels of Auxiliary Load Control Switches (ALCS). These are...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Au contraire. There is a well coordinated plan to establish sub-50MWh commercial battery storage all over the UK. The bit I don't like about the p...

2 years ago
Reply
RE: How do smart meters actually measure the amount of energy?

But the UK's Smart Meter specification was drawn up by Government in consultation with Ofgem. The meter manufacturers built to that standard in orde...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

I agree. So this needs a data request to ESO and a large hook to drag this topic back on target... Suffice to say that we must have off-grid battery...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

That's tricky. The internet has lots of data bout domestic demand per half-hour, but industry is only discussed in terms of monthly/yearly trends. O...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Yes, I was too eager to post.I should've sought out a graphic depicting electricity-only. I've inserted the relevant diagram to your previous post.

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Much as I admire your view of the industrial strength of the UK, you and the Government Office of National Statistics are in disagreement 😎 ...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

OK. It depends on the type of fuse, but I wouldn't expect a 125A fuse to blow for several minutes if I exceeded it's rating by 50% or so! That's the...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

I'm going to keep 'approving' these posts from @sikorsky92 because the points being made are technically challenging 🙂 ... even if somewhat terse! Y...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Indeed! ... and all the more so if the inverter/BMS is trying to measure that voltage whilst simultaneously charging the battery at the upper part of ...

2 years ago
Reply
RE: How do smart meters actually measure the amount of energy?

That's one heck of a second post to this forum @sparky ! From the above explanations I'm assuming that you have first-hand knowledge of how smart me...

2 years ago
Page 130 / 203
Share:

Join Us!

Latest Posts

Members Online