Activity
 
Notifications
Clear all
Transparent
Transparent
@transparent
Moderator
Illustrious Member
Joined: Jan 20, 2022
Last seen: Aug 2, 2025
Topics: 16 / Replies: 2419
Reply
RE: MCS and NAPIT complaints process

I agree with @derek that this needs to go to your MP. Your installation will probably also have been given approval by your Local Planning Authority...

2 years ago
Reply
RE: Say hello and introduce yourself

Thanks for those comment @mark3robinson and welcome to the Forum.Vaillant have successfully built up a large number of approved installers. Whether ...

2 years ago
Reply
RE: Say hello and introduce yourself

Have a look through the growing library of energy storage topics @technogeek. We're not suggesting that the 240v mains connections be made by yourse...

2 years ago
Reply
RE: ASHP insulated pipe under/up through concrete beam & block floor?

Yes, I like the idea of replacing a block in the sub-floor to provide a more robust entry point into the house. Sleeving the pipe(s) with corrugated...

2 years ago
Reply
RE: Say hello and introduce yourself

As you're a self-confessed Geek, why would you want such a storage battery installed for you? If you have a look at the topics on the Energy Storage...

2 years ago
Reply
RE: ASHP insulated pipe under/up through concrete beam & block floor?

Using common sense alone, I don't like the suggestion of using a core drill through a beam & block floor slab to take any of these pipe sizes. A ...

2 years ago
Reply
RE: Octopus no longer requires MCS certification for SEG payments

That's good to know @chickenbigThere will be many forum members here who would be competent enough to install their own renewable generation devices, ...

2 years ago
Reply
RE: Barely used Air Source Heat Pump and Water Cylinder

I'm probably not the only one here on the forum who can see why this ASHP didn't work for your colleage. The position of the external unit doesn't a...

2 years ago
Forum
Reply
RE: A question about voltage, batteries and battery operated tools

As this is on an open forum, can I make a response which even more simple?! 1. Each power tool has a voltage at which it must operate.You must m...

2 years ago
Forum
DIY
Reply
RE: New Tariff: Octopus Flux

Thanks for that information @howardp99 Remember that you must first exhaust both stages of a complaint against an energy supplier before the Ombudsm...

2 years ago
Reply
RE: A question about voltage, batteries and battery operated tools

Equally you must use the right charger for your power-tool battery. There are some chargers which can detect the chemistry and voltage of a battery ...

2 years ago
Forum
DIY
Reply
RE: Removing a Meter

No. The substation is where the voltage drops from 11kV to 440/230.In your case that transformer is 35/1198 and it's on a pole next to your house! I...

2 years ago
Page 128 / 204
Share:

Join Us!

Latest Posts