Last seen: Jul 8, 2025
@derek-m π€£ π€£ too late!! I should have... especially I a couple of g&t in.... Sadly not fully conclusive. Not sure if it was me... g&t...or w...
@derek-m brilliant!! Simple is always best!! I'm going up now!!!
Just noting output so far today. When setting up Solaredge monitoring I added all the working optimisers - but have not yet done a physical check of t...
DNO has given permission for 5.5kwh max export - which I don't think we would exceed very often anyway due to non-optimal angle and orientation. Not...
@transparent really helpful thoughts - thanks! Very happy to have got monitoring working. I'm guessing the power down/up helped "kick" it into acti...
well... Day 1 after cleaning did not show any noticeable improvement! But of course hard to make exact comparisons without being certain of brightness...
Tried turning off DC, inverter, AC for 15 mins as suggested:www.partsxp.com www.partsxp.comRebooted RouterTurned back on AC, Inverter, DC.....Result.....
I can now "see" my inverter and optimisers through the solaredge portal ... BUT... its not monitoring the actual production etc. Looking at the LAN ...
i see in May 2022 the peak day was 34.39kwh. Only 3 days above 30kwh, 18 days above 20kwh, 12 days under 20kwh & 1 day unrecorded According to G...
small update! I have successfully made the LAN connection (basically easy enough once I got a long enough ethernet cable). This enabled my invert...
- 26 Forums
- 2,114 Topics
- 46.4 K Posts
- 46 Online
- 3,410 Members
Join Us!
Latest Posts
-
RE: Is your heat pump insured?
Are you sure its not covered by 'central heating system...
By JamesPa , 5 minutes ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Delighted to hear that the install went wel...
By JamesPa , 9 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist With a 7.2 kWp south facing array, you s...
By ChandyKris , 3 hours ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 4 hours ago
-
Benefits of an extra horizontal loop for GSHP
Hello everyone, We're in the process of installin...
By thewiseoldbird , 22 hours ago
-
RE: Say hello and introduce yourself
Hi @seatonian - Yes, I know Seaton, and I have the Nat...
By Transparent , 1 day ago
-
RE: Buffers, hot water and cooling
The principal reason that heat pumps have minimum flow ...
By JamesPa , 1 day ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 2 days ago
-
RE: Wood burner with ASHP - direct air?
I love the new fully Viking look... best personal avata...
By Mars , 2 days ago
-
RE: No-code, plug-and-play monitoring for your heat pump
I think I have found βThe One!β Waveshare ESP32-S3-POE-...
By Grantmethestrength , 3 days ago
-
@downfield and @toddles, this isnβt in the settings cur...
By Mars , 4 days ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (Β£700!) bu...
By Prunus , 4 days ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 4 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 4 days ago
-
RE: Air source heat pump roll call β what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 6 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 6 days ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@rikiarn - just have a think as to how much it will cos...
By Transparent , 7 days ago
-
Don't do much digging around.That's best left to the pr...
By Transparent , 7 days ago
-
Hi all, I was wondering if anyone had an idea of how th...
By Wh0am3ye , 7 days ago
-
RE: EBAC re-entering the ASHP market in 2023
@toodles confirm i have Ebac 5kw ASAP + homely and it w...
By marcinwloch69@gmail.com , 1 week ago