Last seen: Sep 8, 2025
Hi - last week a Mitsubishi service tech installed a software update to our 11.2kW R32 unit. Apparently it alters the behaviour of the linear expansi...
our solar schene IBG had a £100 excess, as I recall. I considered using that for our solar claim but Section 75 thankfully paid in full.
My experience to date has been that many installers in residential renewables won't accept credit cards. Luckily our first solar installer did, as t...
Same for us. Our Ecodan now runs on WC with all emitters fully open. Neostats are now used for monitoring only.
@glpinxit Thanks for this - really useful. We have the Ecodan cylinder with LLH with two emitter zones. I'm currently monitoring flow temperatures a...
@glpinxit Thanks for all this info. It's much appreciated. With hindsight I wish I had specified a dedicated HP consumption meter. Using my pre-AS...
many thanks for sharing this. That's an excellent improvement that you've achieved with your adjustments. Is your Ecodan controller an FTC6? How ha...
Mars, I do recall asking about this at renewal. I've just gone back and checked the policy wording again and there is one related exclusion, for loss...
@sunandair hi, it's the current PUZ R32 range. There's a diagram in the Mitsubishi Ecodan Databook. I've attached a screenshot (see top left corner)
Yes that's right. I remember reading about this when we were ordering ours. The 5kW has a smaller enclosure than the 6, 8.5 and 11.2kW versions. Our...
@rhh2348 yes, the compressor symbol on the main screen will include a moon icon whenever either of the Quiet Mode settings is selected. I know what ...
@derek-m it's 140mm. Mitsubishi recommends minimum 100mm for the Ecodan R32.
- 26 Forums
- 2,158 Topics
- 47.4 K Posts
- 30 Online
- 5,736 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Who’s Caved and Switched the Heating On Already?
I have automated this decision. I have a heat pump with...
By jamespetts , 8 hours ago
-
RE: COP is not the only measure of efficiency
Can I clarify - is the LSV the manual balancing valve? ...
By jamespetts , 8 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Another result and another very happy service customer:...
By ASHP-BOBBA , 9 hours ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 10 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 10 hours ago
-
RE: Buffers, hot water and cooling
I agree it seems like a lot of work particularly as its...
By JamesPa , 11 hours ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 14 hours ago
-
RE: Renewables & Heat Pumps in the News
@mike-patrick Well, if Europe is stalling partly due to...
By Toodles , 14 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
The size of DHW tank affects the anti-legionella cycle....
By Transparent , 15 hours ago
-
RE: Heat Pump SCOPs – The Truth Might Not Be What You Think
@scalextrix Name plate capacity
By HCas , 18 hours ago
-
RE: Solar Thermal DHW and ASHP
I was originally contemplating a solar thermal installa...
By jamespetts , 19 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
My system installed in July 2024 has produced 6.4mWh in...
By jamespetts , 19 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
@judith thanks for your suggestions. Starting from col...
By GrahamF , 2 days ago
-
RE: Inventor (Midea) Heat Pump short cycling advice
I switched to "fan coil mode" to be able to set water t...
By immunity , 2 days ago
-
RE: DESNZ doing a survey which asks the right questions!
Without a survey their only source of data is probably ...
By JamesPa , 2 days ago
-
RE: Can you help with our research: solar panels, EV chargers, home batteries, heat pumps?
Just done your survey!
By Judith , 2 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
@cleardene-ashp just thinking about your issues here. Y...
By Judith , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
@cathoderay OK let's wait and see, it sounds an interes...
By Tasos , 3 days ago
-
RE: What is the Heat Geek Guarantee?
@judith, I’m with you on Heat Geek, but there really do...
By Mars , 3 days ago