Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youâll be able to ask questions, join discussions, follow topics youâre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Nov 21, 2026
You've spent ages deliberating over flow rates being potentially noisy, whilst running your preferred lower flow temperature. But remember that your...
Are your neighbours units specifically designed for coastal areas and are your neighbours regularly rinsing off the unit and its heat exchanger? In ...
Having just ripped out storage heaters and fitted radiators ready for installation of a heatpump, I think your approach would be unusual/madness unles...
I've had a genuine velux roof window crack after fitting solar control film on the inside. That was several years ago and the first hot sunny...
@editor I watched some of the videos on Grahams heatpump channel and they look to be well put together. Importantly the controller seems to be a lot m...
@will-h posting above is the reason for me finally saying hello, as the HP I'm swaying towards is the Haier 6kW R290 single phase air source heat pump...
I've been following the forum, watching the podcasts for a while as our heating definitely needed an overhaul. The house is a 1990 conversion of an ...
@editor "The interesting bit is that many modern inverter heat pumps already sort of do this internally. They donât necessarily just whack the flow te...
Iâm not a huge fan of AI, but comparing one scenario to another and working out the maths definitely has its uses. I asked: âHeating a 200L DHW cy...
It was just a thought, because I'm looking to get a Grant r290 6.5Kw and the tech data sheet shows A7 W35 7.62Kw COP 4.95 A7 W55 7.23Kw COP 3.00 ...
- 27 Forums
- 2,826 Topics
- 67.1 K Posts
- 3,363 Online
- 7,246 Members

