Last seen: Oct 14, 2024
@derek-m yes I understand. I don't actually switch it off - the temp room controllers will call for heat depending on the set temp - so I may just le...
@derek-m Hi - when you say set the WC offset to zero - do you mean on the control panel - it is currently +0 - I'm right in saying that if my WC is 45...
@gary Interestingly the living area got up to 17 degrees this evening. I think I just need to increase the flow - I'll see how it goes tomorrow - I c...
@gary OK - so I changed the lower temp to 4 and comes back as 36 (picture attached). I increased the flow temp to 45 degrees (from 40) this morning -...
@gary OK - so the actual controller which is next to the tank in a separate room - 15 degrees would be about right. Attached a reading from just now
@gary hi - attached picture of thermistor readings...am I right i n saying that TH1A is the room temp reading - not sure where that is set? THW1 ...
@gary its set to 5
I will post some photos later - I've got to go to work now - thanks.
@derek-m yes not too technical - at least for heating systems!!! I'm having to learn about it though. Yes three thermostats in each room (they are a...
@skd Hi - yes that does! I put on the compensation curve in March and hadn't looked since and when I saw yesterday thought I had not done it properly...
I have also (last night) changed the comp curve to 45 (from 40) - it's not too warm outside today - so I will see if that makes a difference. I've ne...
@gary picture of flow rate
- 26 Forums
- 2,122 Topics
- 46.6 K Posts
- 97 Online
- 4,529 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 5 hours ago
-
You may well be right, @jamespa.
By Majordennisbloodnok , 9 hours ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 10 hours ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 12 hours ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 14 hours ago
-
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 2 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 2 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
I agree with @morgan. You can turn down the target t...
By JamesPa , 2 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 2 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 3 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 3 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 3 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 4 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 4 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 4 days ago