Last seen: Apr 12, 2023
What does one of these PHE's look like and why would you chose one over and buffer tank? I believe my Midea system has a direct buffer tank with the...
@cathoderay Yeah you would think a 16kw and a smaller one would be the way to go but the installer normally installs only Vaillant but couldnt get the...
My installer seemed to have clocked that the 16kw really was only 13.5kw when compared to other brands (I havent looked at the data Midea provide too ...
@batalto Ours stopped doing it as and when the temp of the DHW dropped x below the set point , hence I had to use the timer to ensure it worked now th...
@batalto But do you have problems with hot water not being available, ours was 34 degrees this morning having not heated up over night like it should ...
@grahamh Last night the ASHP produced no DHW. Having reverted to DHW on a timer this usually works but not last night (I believe the temp dropped to a...
Think it was called MiCloud or Mycloud, but you can only get it from the direct or through your installer.
@batalto I believe they have an app developed by Freedom that they consider is for the installers, forgotten the name of it but its not on the app sto...
@grahamh It could be at 29 degrees for 6-7 hours and still not kick in, if it was only 90mins which I think its set to it wouldnt be an issue. Even a ...
@grahamh Hi Graham, I have one question for you. Our Midea ASHP is set the DHW as a priority and should kick in anytime the temp drops 10 degrees belo...
@derek-m Ah ok, yes my intention is to do as you describe. But I did think that feedback of the space temp to the controller would help it adjust flow...
@derek-m I presume by true temp compensation you mean having a sensor in the area being heated thats connected back to the ASHP controller. Therefore ...
- 26 Forums
- 2,282 Topics
- 51 K Posts
- 229 Online
- 5,943 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
@transparent thank you, I'll take a look at those links...
By MairiA , 1 hour ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey I’m always watching 👀My Clivet cont...
By Mars , 1 hour ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard That's probably fine, provided as you say...
By GrahamF , 2 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
16Kw AIROSD Manufacturer: Foshan Model: QBKFXFC-...
By Polar bear , 3 hours ago
-
Just a suggestion but upload your images to an AI agent...
By RadWhisperer , 4 hours ago
-
RE: Daikin Wireless Thermostat
The switch from WDC to LWT i.e. pure WC is fairly strai...
By RadWhisperer , 4 hours ago
-
RE: Bosch CS5800i 5kW - Experience So Far
Thank you for your continuous research, and posts. As y...
By ectoplasmosis , 12 hours ago
-
RE: Trying to understand my Nibe F1245
@barry-sharp, is this something you could help with?
By Mars , 13 hours ago
-
I signed up for this, I think it will be a good one. Al...
By ASHP-BOBBA , 17 hours ago
-
RE: Heat Loss v Outside Air Temperature
Ideal conditions to collect the data! Although the left...
By cathodeRay , 18 hours ago
-
RE: My DIY Heat Pump installation
@majordennisbloodnok The 'more' button takes me to ...
By Polar bear , 19 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
@vsmith1 If you have access to Home Assistant then you ...
By Gmuzz , 19 hours ago
-
Aira Intelligence: integrated home energy system
Aira has just announced a new integrated home energy sy...
By Mars , 21 hours ago
-
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH
i cant trace it. Near the pumps in the basement it seem...
By bonobo , 22 hours ago
-
Daikin Altherma Heating Controls using Onecta Integration via Home Assistant
Ok so likely not setting the world on fire here for rev...
By phil bell , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
So I’m still with E.ON Next, and I received a pretty sn...
By Mars , 2 days ago
-
RE: First time wall mounting an ASHP
what you need to do is everything you can to remove the...
By ASHP-BOBBA , 2 days ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
ASHP switched off per specialists guidance. Seems the b...
By Crimson , 2 days ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@andrewj Bear with me, this is my first post on this fo...
By KevH , 2 days ago

