Last seen: Jan 8, 2025
agree with the above.
I agree with your point about off = unrestricted. When my LWT went up to 48, it was in the process of raising the IAT from 21.5 to 22.5. The set po...
I don't think so. It takes about an hour or so to heat from mid 30s to 48.5. I would have though any residual peak from the HW would be long gone? B...
Agreed. It didn't do it immediately; in fact for the first couple of days it looked the same as before. But yesterday after the HW cycle it sneaked i...
No suggestions yet but your AA settings are now the same as mine. What I can see happening in my system is that the IAT is varying between the setpoi...
@Derek-m The former I think. AA pushes the lower end up and the higher end is constrained by my 43 deg upper limit. If I remove the upper limit, th...
Or it may have an in-built one? One thing I notice is that in milder temperatures my LWT doesn't vary much. I've limited my LWT to a maximum of 43...
A typically pro-heatpump Guardian article but most of the data used in the study is from A2A systems.
I don't know but I'd like to. I may try some experiments as it's easy for me to view the results using the monitoring data. If anyone wants to sugge...
Interesting. That explains why the IAT is always above the set point.
I was going to start a new topic but I'll join this one if that's OK. I've been running AA for about a year and am pretty happy with it. It uses abo...
@mcwatson1974 can you explain how you normally use the system? What's on the FTC screen, how do you set the zones and switch the heating on and off...
- 26 Forums
- 2,118 Topics
- 46.6 K Posts
- 63 Online
- 4,523 Members
Join Us!
Latest Posts
-
@adamk what I like about these valves is that once set,...
By Mars , 6 minutes ago
-
-
The sad end of my ECO4 installation.
This afternoon I was advised by a charity that was help...
By Dwynwen , 12 hours ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 16 hours ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 16 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 20 hours ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 20 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
I agree with @morgan. You can turn down the target t...
By JamesPa , 22 hours ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 2 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 2 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 2 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 3 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 3 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 3 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 4 days ago
-
RE: Is this just haze or something more?
@majordennisbloodnok I was giving a talk to primary sch...
By Toodles , 4 days ago
-
RE: Tesla Powerwall – More of a ‘Luxury’ Than an ROI Winner!
We had our Tesla Powerwall 3 (and Gateway) installed ea...
By Old_Scientist , 4 days ago
-
Indeed. With a battery its presumably the battery con...
By JamesPa , 4 days ago
-
RE: No-code, plug-and-play monitoring for your heat pump
To update an ESP device using ESPHome in Home Assistant...
By Grantmethestrength , 5 days ago