Last seen: Jan 8, 2025
I have heard you have to be careful with cooling as a lot of condensation can be produced on the cold pipework. Also, doesn't your ASHP cease to be p...
Of course I haven’t proved or disproved anything with such an unscientific experiment. I think what I have done is show that when my heat pump has 15...
There are peaks but they are small and narrow. They are not using a lot of energy. I didn't say cycling wasn't less efficient; my point is that while...
Let us know how you get on.
Your curve looks fine if it works for you. You can change the flow temp settings; it's in Operation Settings - Heating Operation - Flow Temp Range. ...
@rgledhill, what temperature is your DHW set at? Your DHW COP is a bit low but not disastrously so and could be explained by a high-ish DHW temp. I...
Same to you Mars and thank you for all your hard work.
@Huwsy, I don't think the house can react that quickly. The drops in flow temp are only for 10 or 15 minutes. Like I said it pulls the average flow...
@Huwsy, I don't think the house can react that quickly. The drops in flow temp are only for 10 or 15 minutes. Like I said it pulls the average flow...
On my system, defrosts definitely lower the flow temp, both on the monitoring and the rads getting noticeably cooler. Does it make the house cooler? ...
Derek, that's probably quite easy to do because there is plenty of space inside the thermistor box. Could the resistors be put upstream of the screw ...
- 26 Forums
- 2,122 Topics
- 46.6 K Posts
- 88 Online
- 4,529 Members
Join Us!
Podcast Picks
Latest Posts
-
There are some projects looking at how smart meters and...
By Jeff , 1 hour ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Yes, I use Homely, as to whether Daikin is u...
By Toodles , 13 hours ago
-
RE: ASHP heat output monitoring
@carlo - welcome to the forum. I don't know about LG...
By cathodeRay , 18 hours ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 22 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 2 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 2 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 2 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 2 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 3 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 3 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 4 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 5 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 5 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 5 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 5 days ago