Activity
 
Notifications
Clear all
Judith
@judith
Member
Prominent Member
Joined: Nov 28, 2023
Last seen: Aug 6, 2025
Topics: 2 / Replies: 371
Reply
Reply
RE: What is the most important factor for you when choosing a heat pump brand?

I plumped for brand reputation but that doesn’t really fully encompass it. All of the above might have. For me mitsubishi or Vaillant yes daikin...

1 year ago
Reply
RE: HP Cycling, Expected or Undesirable

@johnmo max flow temp of 32C! Do you have huge radiators or very little heat loss? You can’t be describing ufh since it’s responding too quickly.

1 year ago
Reply
RE: Are Octopuses Slowing Consumer Adoption of Heat Pumps?

Going back to the original post and Octopus are partnering with heat geek and today’s plumbers were chatting about this at lunchtime as to how it wil...

1 year ago
Reply
RE: Advice on ASHP choice needed

Each installer/designer can have their own idiocies one wouldnt count our cavity wall insulation because we couldn’t prove it was still working aft...

1 year ago
Reply
RE: Two possible heat pump routes - how to evaluate them?

@lucia another thought is flow temp. I played around with our house on heat punk to address this question. If I adjust our radiators to those needed f...

1 year ago
Reply
RE: Two possible heat pump routes - how to evaluate them?

@lucia I’ve been having a think about your choice. Which magazine says the ovo tarrif is the best followed by octopus agile then octopus cosy. I th...

1 year ago
Reply
RE: Two possible heat pump routes - how to evaluate them?

Here’s a good demonstration of the variation with buffer or 4 port that @heacol is referring to. Possibly better posted in the very long llh thread. ...

1 year ago
Reply
RE: Local Planning authority requirements for heat pumps - information sought.

Our planning application is submitted and noise may not be addressed because we ended up within MCS on everything except it can be seen from the road....

1 year ago
Reply
RE: Two possible heat pump routes - how to evaluate them?

@lucia @gunboat totally agree avoid the 9kW at all costs and in proportion the 4kW is the same. Bear in mind that the 4 doesn’t output 4 at -2C so if ...

1 year ago
Reply
RE: Two possible heat pump routes - how to evaluate them?

We’ve have 2 detailed heat loss surveys now with me insisting that we’re not running at ‘high temperatures’ other than for the dhw legionnaires cycle ...

1 year ago
Reply
RE: NEW BOY HERE looking for Battery Storage Advice

Just a couple of questions both Victron and Pylon need to be kept indoors and have you thought where? for your FIT system you need an AC inverter...

1 year ago
Page 28 / 32
Share:

Join Us!

Latest Posts