Last seen: Jul 28, 2025
Hi again @jaynieq I hope your daily consumption has gone down to the point where you can see that it will average out the horrible very cold days. ...
Can I check I’ve understood the arguments here? Large heat pumps are more efficient for some manufacturer’s ranges, I accept that. And if the contro...
Ofgem is consulting about their current work programme so perhaps we should tell them to change this system within their work plan. “Shaping a retai...
You can help things by putting the DHW on to a timed operation so it’s only topping up before you need it, not continuously, then your system can be u...
The exact waveform does matter too much it’s the average that matters. I can’t read the scale too well but both shapes look reasonable. There’s no ne...
I suspect it’s not reflective to audio waves and rough surface matting is available too. Patterned door mat perhaps ☺️
With a temperature difference on flow and return of 8C is the Aira able to operate comfortably with that? or are they using hydraulic separation I.e....
That is unfortunately what is happening in California since it has lots of sun. But DESNZ can’t learn from others’ mistakes it has to makes its own!
@jamespa nice analysis have you considered something like or neoprene?
Isn’t there a consultation on ofgem in process about now? And since I missed this gem I feel another letter to my MP coming on!
Our system is open no hydraulic separation. The volume is high (18 Large K2 and can’t be bothered to add it up) but the installer still added a 26L in...
If the insulation isn’t wet you can over-cover it. It’s nearly always the more the better. 2cm wall thickness would be a good start.
- 26 Forums
- 2,118 Topics
- 46.6 K Posts
- 26 Online
- 4,523 Members
Join Us!
Latest Posts
-
The sad end of my ECO4 installation.
This afternoon I was advised by a charity that was help...
By Dwynwen , 1 hour ago
-
RE: Why do we need pressurised systems?
@iaack I enquired of Wattson and the reply was very muc...
By Toodles , 2 hours ago
-
@jamespa that is quite important. It would be good if t...
By Grantmethestrength , 3 hours ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 5 hours ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 6 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 9 hours ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 10 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
I agree with @morgan. You can turn down the target t...
By JamesPa , 11 hours ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 1 day ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 2 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 2 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 2 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 2 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 2 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 3 days ago
-
RE: Is this just haze or something more?
@majordennisbloodnok I was giving a talk to primary sch...
By Toodles , 3 days ago
-
RE: Tesla Powerwall – More of a ‘Luxury’ Than an ROI Winner!
We had our Tesla Powerwall 3 (and Gateway) installed ea...
By Old_Scientist , 3 days ago
-
Indeed. With a battery its presumably the battery con...
By JamesPa , 3 days ago
-
RE: No-code, plug-and-play monitoring for your heat pump
To update an ESP device using ESPHome in Home Assistant...
By Grantmethestrength , 4 days ago