Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 21, 2026
The valves will also enable you to determine if it's actually needed! I had that on a combi in a kitchen once. With a bit of careful plumbin...
@iantelescope I attach a proposed revised system diagram and list of tasks/SoW that @derek-m, @johnmo and I suggest, with special thanks to @johnmo wh...
Yes Most likely we will suggest it is retained, but replumbed as a two port volumiser in the return, for the purpose of assisting de-icing. ...
No problem, Libre office can import and export pdf so we will work with that
Thanks. I imagine the location is humid hence the clouds! The basic plan you have with the plumber is correct but there may be a couple of tweaks/a...
@iantelescope Thanks. That's great. Can you also tell us Where in Scotland are you roughly (to work out the climate)? What's the rough f...
That would almost certainly be madness. Seriously. You have come this far and have all the components for a working system. Persist and prove your ...
Good, and good luck. If the plumber could also balance the radiators that would be good. It needs to be done if not already done. Ideally fitting ...
I have followed this thread for probably 2 years and the advice offered here, from people whose only motivation is to help, has been almost 100% consi...
From my memory earlier in the thread I don't think this is true, I thought the system was designed with primary and secondary with the two connected ...
Shocking indeed, except possibly the second one. Are you certain this isn't a pair of anti - freeze valves?
Does weight matter? If it does check the weight of the thermio as they are preet heavy too. If the tank is too big then a thermio will solve the pr...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@old_scientist I’m thinking along the lines of a multis...
By Toodles , 11 hours ago
-
Britain’s Heat Pump Shitshow is now available to pre-or...
By Mars , 13 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 2 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 2 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 3 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 3 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 4 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 4 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 4 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 4 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 4 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 4 days ago
SPONSORS
