Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 14, 2025
That sounds really bad, our one uses a quarter of the energy when it is close to freezing. Do you have any documentation about the system? If you...
Heck, we never got any heat calculations for our intallation; if anything it is a bit oversized. I'm not condemning the radiators, I and am pointing ...
Scientifically, yes, but I've been in a lot of older houses over the years and seen all sorts of older radiators and rarely anything from the 21st cen...
Basically unless they are only 10 years old, I have great trouble believing that the original radiators are able to put out enough energy from the coo...
That sound like a complete mess. Are they the original radiators or did they replace them with newer high output ones? People who know more wil...
From what I have read it is a start, the issue is more political, in that anything appearing green is seen as evil by the tories and similar. Added t...
Now people have said all the sensible long things, I have a question - can you tell how often it is coming on and off each hour, and is it possible to...
Spirotech, the one on the right, is a fancy water filter, I think pretty much all systems have a spirotech or something similar. To get any particles...
Our panels look a bit more like 10% and 80% setup, but have survived 70mph gusts over winter okay and seem to be rigid just now. The clamp on David's...
That is ridiculous. So you have the hot water tank, a buffer tank, a red and a white tank and a big white one as well. For comparison, our installat...
That's a pain, sounds like you might have been paying through the nose to heat your hot water for a while using the immersion heater. To help with ...
I too would like a small, 0.5 to 1Kw vertical axis wind turbine to go at the bottom of the garden and basically top up the battery we have in the hous...
- 27 Forums
- 2,748 Topics
- 64.7 K Posts
- 1,605 Online
- 7,155 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 4 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 8 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 21 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 21 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 6 days ago



