Last seen: Jul 21, 2024
@djbuzz-07 Sunsynk Are you using lithium/ CAN protocol? If so, mine always starts grid charge @10% It is a setting on the inverter. Can...
Been quite a while since any update - but that's how long it's has taken to get to the root of the issue. Fogstar has owned up and finally ackno...
@robl I've added the screens. Li-Bms screen is accurate. Sunsynk screen shows a +0.3V difference between it and battery. Also shows voltage s...
@robl Ill take a photo of the screen tonight & also in AGMV mode - From memory, it is set to 56.7V - Unless i factory reset/run it in AGMV ...
@chickenbig Sunsynk support claims that Pylontech is not supported. Tho the BMS screen on the inverter is properly populated with the correct...
SITREP #5 No improvement on the system. Everyday, it is charging 1% less. Today was 84% then stopped charging. User timer set to 100%SOC. I'm ...
@misterb @vaugi OK, I'll contacted Fogstar Were I fall down that it is the battery - is that when the Sunsynk is factory reset - it charg...
@misterb @robl SITREP #4? Blimey, what haven't I tried Voltage mode, wasn't working very well. It's a bad SOC replacement. I tried every single...
Interesting review. Good timing for myself. Will be driving one shortly - how did you find space in the i4 - anyway bigger than expected?
SITREP #2 Progress, but not logical progress on the Sunsynk. So I changed the Sunsynk over to AGM-V Good - I was able to charge to 100% and...
Hey I ran active balancer for the first 3 cycles. Voltage on the screen looks in good shape per cell. Figuring out the Sunsynk however......
Ok, I have ths mode turned on. How did you know what voltages to set on the inverter?
Latest Posts
-
There are some projects looking at how smart meters and...
By Jeff , 5 hours ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Yes, I use Homely, as to whether Daikin is u...
By Toodles , 17 hours ago
-
RE: ASHP heat output monitoring
@carlo - welcome to the forum. I don't know about LG...
By cathodeRay , 22 hours ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 1 day ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 2 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 2 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 2 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 2 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 3 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 3 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 4 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 5 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 5 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 5 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 5 days ago
