Last seen: Jan 6, 2025
I’ve begrudgingly accepted the Eon fixed contract at 34p pkWh today. We’ll pay more from now until April from when the capped price should be similar....
My advice would be to have a towel rail only to hold a towel. Not heat it. Fit dedicated bathroom radiators to heat the bathroom which in turn will dr...
I have 3 Kair heat recovery ventilators in 2 bathrooms and a toilet in the downstairs of our house. They work really well as they bring in a constant ...
I think its better to get closer and do the exterior in much smaller sections to try to find cold spots or leaky areas.
We are currently on 21p per kWh, this should rise to around 28/29p in April. A 20% rise in October would take this to 33/34p therefore I am better to ...
Much easier to do this via the melcoud app or web browser. It can show hourly temperatures for flow/return/tank temp etc.
I doubt you'd be able to heat the property with a 16kw heat pump for cheaper than £120 a month (especially with the direction of travel for electricit...
What are you being offered as everything I can see is just silly amounts so better staying on the capped variable tariff.
It might be worth borrowing/renting a thermal imaging camera as it could show the leaks/paths the water is flowing through.
I have this issue at our property running a secondary return for instant hot water. Our house is quite large with long pipe runs from the unven...
I had an issue a couple of years ago where it constantly ran the defrost cycle late at night when it was cold. I disabled the frost protection as our ...
Jump to 6:00 (if you can't be bothered to watch the whole thing - its worth a watch if you are bored). Fit and forget seems to be the approach f...
- 26 Forums
- 2,228 Topics
- 49.5 K Posts
- 221 Online
- 5,890 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Help me keep the faith with my air source heat pump installation
My single Mitsubishi ilife2, which is otherwise perfect...
By JamesPa , 45 seconds ago
-
RE: Rate the quality of your heat pump design and installation
Octopus - Daikin Altherma 3M 4KW heat pump install - Ap...
By bimbleuk , 4 minutes ago
-
RE: Electricity price predictions
I broadly understand these arguments. Just that I would...
By Batpred , 6 minutes ago
-
RE: How good is the app support for your heat pump?
@editor have you decided on which brand you are going f...
By Grantmethestrength , 6 minutes ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
@bubuontheweb thanks for the update. There are a lot lu...
By Mars , 27 minutes ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@lucia, I appreciate the feedback, and we’ve received a...
By Mars , 30 minutes ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
I hope out of all of this that I can run the system at ...
By Crimson , 37 minutes ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Daikin Altherma 3M - 4kW (R32 2022 Release) (EDLA04E2V3...
By bimbleuk , 1 hour ago
-
RE: Twin 10kw Grant Aerona Volumiser Tanks using lots of power
The Grant Aerona3 external volumisers are insulated uni...
By Grantmethestrength , 10 hours ago
-
RE: Replacing knackered oil boiler with ASHP - Perthshire
Where to start? In brief we are happy with the system...
By DowallyDrifter , 12 hours ago
-
Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
I have a Mitsubishi Ecodan EHST20D-YM9D with PUHZ-SWM80...
By Johj45 , 12 hours ago
-
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel
Im just in the process of connecting up my mixergy cyli...
By bontwoody , 20 hours ago
-
Unless anyone can tell me differently, there appears to...
By DowallyDrifter , 22 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
I run my Vaillant on either expanded mode (either end o...
By JamesPa , 1 day ago
-
-
RE: New Fogstar 15.5kWh upright solution
From my experience with inverters from different Far Ea...
By Transparent , 2 days ago
-
@bontwoody Thank goodness you are ‘back on-line’ so to ...
By Toodles , 2 days ago
-
RE: Automation options to maximuse efficiency & ToU tariffs
@majordennisbloodnok Seems reasonable. It would be m...
By Batpred , 2 days ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@hcas OK Thanks. Will do.
By bontwoody , 2 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
@transparent Thank you for a very comprehensive, tim...
By Batpred , 2 days ago