Last seen: Jul 4, 2025
What did you press to get to this screen, it doesn't look right at all, but try a long press of the menu button see if the screen looks any different....
They are the permitted development requirements for England. Development is permitted only if the air source heat pump installation complies with ...
There are plenty of 11kw units around Mitsi, Valliant and Dakin all have single fan 11kW units and as James said you may not even need a unit that lar...
If your heat pump capacity was calculated using MCS heat loss calculations which it has to be for permitted development use, it is likely to be oversi...
@marvinator80 I find that with my system UFH and rads I need all circuits open all the time calling for heat 24/7 any setbacks when its 0 or below onl...
I suspect you have your hot water on a timed schedule so that its only allowed to come on at particular times of the day. If you go to the hot water...
Mine was driven by Mitsubishi's presence in the UK and the installer recommending it, its was the only brand I was really aware of at the time 2018.
Just an observation one quote is for a 250L HW tank the other is for a Sunamp 210 unit, which are expensive, I would get that requoted with a 250L HW ...
I would look at some of the threads on the Grant heat pumps and check you settings they probably aren't optimal and could just be running at a constan...
My usage in non-heating months is similar to yours 450kwh a month, adding heating in Nov was an extra 400kwh, Dec 500kwh and Jan 700kwh. This is a 5 ...
@iancalderbank I just run the downstairs UFH only, so no one gets hot whilst asleep, saves about £1.50 a day in terms of off peak vs peak prices. It...
You are correct there are 5 speeds available set through the settings menu, under pump speed, these are fixed rates and the ecodan cannot change them....
Latest Posts
-
RE: Heating coming on when not required
@editor Thats correct. Its not particularly cold but th...
By bontwoody , 1 hour ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 3 hours ago
-
RE: Pressure drop Primary circuit
Just to update you all. I made up my own fill loop as...
By ohdearism , 4 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hmm Before doing that I would want to be certain that...
By JamesPa , 8 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 8 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 19 hours ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 1 day ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 1 day ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
