Last seen: Sep 19, 2024
@cheshirecat When you say that you have a Mitsubishi 'room stat', do you know if it is actually a thermostat or a temperature sensor? Does it have a...
@cheshirecat It would appear that the heat pump was heating the hot water cylinder, when the Flow Temperature went above 50C. Once the DHW was up to...
You could start by turning any thermostats up to 23C, then see if that has any effect upon the cycling.
@craig1980 My idea was to first gather the information, then give it a close dose of inspection, and then try to decide what needs to be changed.
@craig1980 I have attached a copy of a manual which details all the various parameter settings, which are listed from page 24 onwards. I would sug...
Hi Craig, To try to find the root cause of the problem, it is necessary to observe how your system is actually operating, and compare this against h...
@majordennisbloodnok My point was not so much about the split of where the energy was coming from, but how close we are getting to not having enough...
@craig1980 Let me have a read through the manual and decipher what some of the descriptions mean. I'll get back to you tomorrow.
Hi Everyone, Has anyone, besides me, noticed where we are getting our electricity from at the moment? Fossil Fuels - 59.9% Renewables - 3.9% O...
Did you close the airing cupboard door overnight? The reason I ask is that sometimes equipment, and circuit boards, can suffer intermittent faults due...
Had the indoor temperature changed? A further test would be to watch closely the operation of the wireless receivers for the thermostats when the syst...
I'm afraid Graham Hendra lost my vote of confidence, when he admitted that he specified the LWT setting at the upper end of the WC curve to be 37C, ju...
- 26 Forums
- 2,417 Topics
- 54.8 K Posts
- 428 Online
- 6,096 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Recommended home battery inverters + regulatory matters - help requested
Reposted query from another thread requested by @transp...
By Sheriff Fatman , 20 minutes ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 26 minutes ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
@robs Just to quickly fill in some of the gaps in the r...
By Sheriff Fatman , 58 minutes ago
-
RE: Fan unit Making terrible noise HELP!!
@ashp-bobba The fan unit has now died. ESP says it's no...
By GutoFfowc , 58 minutes ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 2 hours ago
-
Hi, I think I’m having some issues with my Ecodan as...
By Patch321 , 2 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 3 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@synthbuilder Further to the above…‘What a difference t...
By Toodles , 3 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 3 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 3 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 14 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
@jamespa I wasn’t offended at all. You are very knowled...
By Davesoa , 15 hours ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 15 hours ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 17 hours ago
-
-
RE: Replacing my 18 month old Hitachi Yutaki ASHP
A big thank you to @jamespa for all his efforts online ...
By trebor12345 , 20 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor It is indeed for servicing. My current service ...
By Morgan , 21 hours ago
-
RE: Speedcomfort radiator fans
In case it helps Andrew Kuhne on openenergy monitor has...
By JamesPa , 22 hours ago
