Last seen: Sep 19, 2024
@ajdunlop I don't have an Ecodan, so I have to make assumptions as to what function the various setting parameters perform. Flow temp, range *10 -...
It is all to do with the amount of stored heat energy and its location. A litre of water contains approximately 3500 times more energy than a litre of...
I doubt that having a PHE will make much if any difference to the defrost cycle. The temperature change at the flow and return temperature sensors w...
Hi Kev, Yes, quite easily. One resistor would be connected directly across the two terminals. Then one of the wires, red or white, would be disconne...
The primary water flow does not change direction, it is the refrigerant gas flow inside the heat pump which changes direction.
Rather than selling your clients gas heaters, you should first direct them to this forum, unless your post is some form of advertisement? I fully ag...
@kev-m Hi Kev, I have just finished calculating the resistance values that could be used to vary the response of the Thermistor TH1, which is used...
Hi Kev, mjr and other Ecodan owners, I have been doing some investigation as to why the Ecodan Auto Adaptation would appear to not always perform as...
Not if you have a GSHP, which I believe is often the case in the Scandinavian countries.
I would suggest switching off the power to the whole system for about 1 hour, to ensure that all capacitors are fully discharged. Then power the syste...
I'm glad to hear you have joined the 'bedtime reading' team.
@calzo21 I have attached a copy of the Ecodan data that Kev was kind enough to supply. It is over 400 pages long, so makes excellent bedtime reading...
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 346 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Experience - New Build / Complete New Heating System
@bash you and me both, can agree. Nothing like shooti...
By vincro , 1 minute ago
-
RE: Heat loss based on gas usage
@jamespa Thanks. The numbers posted above were jus...
By Bash , 24 minutes ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 59 minutes ago
-
RE: I’m glad the cold spell is over!
Thanks for the update, @judith. Cold spells with heat p...
By Mars , 1 hour ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@johnbroome As I say I think you probably have a fau...
By JamesPa , 2 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
@batpred I started reading this thread thinking I would...
By Hook , 2 hours ago
-
RE: Please help with the settings ecodan
@sheriff-fatman when I increase it to number 3, the ...
By nose1972 , 3 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
So far as i can see no because its NOT connected to the...
By JamesPa , 3 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 4 hours ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 4 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 4 hours ago
-
RE: Rate the quality of your heat pump design and installation
Well, the guy came out, turned the heat pump to max, we...
By razz , 4 hours ago
-
Midea R32 setup and bizarre running with lengthy off periods?
Hi I am new to the world of ASHP and have just had a re...
By Countryman Helmsley , 5 hours ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 5 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 6 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 7 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 8 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 8 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 9 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@ashp-bobba Yeah I'll give it a go, will check filter...
By Anon67 , 9 hours ago

