Activity
 
Notifications
Clear all
Derek M
@derek-m
Member
Illustrious Member
Joined: Mar 4, 2021
Last seen: Sep 19, 2024
Topics: 7 / Replies: 4405
Reply
RE: A conundrum…

Things do stay the same. My wife still hates the cold. 🙄

2 years ago
Reply
RE: My Mitsubishi ASHP has used 1078kWh from 25 November to 31 December – Help please

I would suggest that you check where each pump is connected and feeding. I suspect that the right-hand one may be for your DHW, since it appears to be...

2 years ago
Reply
RE: My Mitsubishi ASHP has used 1078kWh from 25 November to 31 December – Help please

@sarah It would appear that you have 3 water pumps and what could possibly be a plate heat exchanger. I would need to be able to read the model num...

2 years ago
Reply
RE: My Mitsubishi ASHP has used 1078kWh from 25 November to 31 December – Help please

There will be an air release valve somewhere, but I'm not certain where it will be located, normally in the highest section. I suggest that you Google...

2 years ago
Reply
RE: My Mitsubishi ASHP has used 1078kWh from 25 November to 31 December – Help please

@sarah I would expect the flow rate to be greater than 13 litres per minute at a pump speed of 5, is your water pump actually wired to the heat pump...

2 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

@cathoderay Thanks for the response, which appears to close one avenue of investigation. I have attached a spreadsheet detailing the data that I thi...

2 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

@cathoderay I forgot to add the code in the previous post. from homeassistant.const import ( CONF_NAME, CONF_TOKEN, CONF_HOST, ...

2 years ago
Reply
RE: My Mitsubishi ASHP has used 1078kWh from 25 November to 31 December – Help please

@sarah I would suggest that you watch the following video, which details how to check and change the pump speed. Before making any changes I would a...

2 years ago
Reply
RE: My Mitsubishi ASHP has used 1078kWh from 25 November to 31 December – Help please

Looking at the temperature gauges in the photo's, it would appear that the water is going into the UFH at approximately 28C, and coming out at approxi...

2 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

In the _init_.py there is the following code which imports data from HA. I have a feeling that HA contains a list of the sensors etc. from which data ...

2 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

@cathoderay I carry out day trading on the stock market, so often have lots of free time when nothing exciting is happening, so you don't have to co...

2 years ago
Page 154 / 369
Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO