Last seen: Sep 19, 2024
Being the old cynic that I am, I suppose who is included or not, will depend upon 'what result this company has been instructed to achieve' from the d...
@theallan As the saying goes "a picture is worth a thousand words". The heat meter temperature sensors are indeed in pockets, and if correctly ins...
@theallan Where are the temperature sensors associated with the heat meter, are they in pockets or clipped to the pipework? Are the temperature sens...
So will you get a free heat pump? 😋 In which case you will have a spare water pump and heat pump. 😎
@iantelescope Where are you measuring the signal using the scope? What happens if you connect the cable to a pump? How does the waveform change if y...
If correctly installed, I would expect the external heat meter to be the more accurate. Please provide photo's, both distance and closeup, of your ins...
@iantelescope Assuming that the PCB is removable, you could try locating the faulty component and replacing.
@jeff I agree, the forum should be as inclusive as possible. When answering queries one should be aware of the technical knowledge of not only th...
The fact that the voltage drops quite considerably may indicate a fault on the PCB. Does the width of the pulse change if you change the DeltaT? D...
Without knowing what components are on the Samsung PCB, it is difficult to say if it may have been damaged. Are there any cautionary notes in the docu...
@davesoa You could always start with improving insulation if that is possible.
@iantelescope If the timing on the graphs is milliseconds, then the PWM operating frequency from the Samsung PCB would appear to be approximately 2H...
- 26 Forums
- 2,367 Topics
- 53.7 K Posts
- 192 Online
- 6,042 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Interesting question. To be frank, since I have no inte...
By Majordennisbloodnok , 4 hours ago
-
RE: Changing from 4-port buffer to volumizer
@andy1618 see the very sage advice from @editor above. ...
By JamesPa , 13 hours ago
-
RE: New Fogstar 15.5kWh upright solution
The video shows the JK balancer, but the connection of ...
By Batpred , 16 hours ago
-
RE: Ecodan unable to hit legionella target temp - what's the consensus?
@9jwr9 Hi, yes this is the issue with every (stand alon...
By ASHP-BOBBA , 17 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk FWIW I managed unintentionally to 'coax' mine in...
By JamesPa , 18 hours ago
-
RE: Help needed with Grant Aerona 3 issues
Ok please post back once experiment complete. Give it ...
By JamesPa , 18 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
You are in essence right. Adia only works with selecte...
By JamesPa , 18 hours ago
-
No, you haven’t missed out, @batpred. This thread’ll st...
By Majordennisbloodnok , 19 hours ago
-
RE: Tesla Powerwall – More of a ‘Luxury’ Than an ROI Winner!
Also, though they weren’t prepared to match the price t...
By Toodles , 20 hours ago
-
RE: How long will your energy contract last?
My INTELLI-FIX-12M-25-08-29 has less than 12 months to ...
By Batpred , 20 hours ago
-
RE: GivEnergy 2025 forthcoming batteries and inverters
Then, perhaps @toodles , you should've made a submissio...
By Transparent , 20 hours ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I am wondering if anyone with an EV could find the 7p/k...
By Batpred , 21 hours ago
-
Possibly, but it would also reduce DeltaT across the em...
By JamesPa , 21 hours ago
-
RE: ASHP sizing - value of Heat Transfer Coefficient
@cathoderay It was reminiscent of the BBC Open Universi...
By Toodles , 21 hours ago
-
-
@morgan They are unsupervised these days, can’t get the...
By Toodles , 4 days ago
-
RE: Setback savings - fact or fiction?
Exactly. We only need to compare conditions, to decide ...
By cathodeRay , 5 days ago
-
RE: Need Help Optimising My Rushed ECO4 Install: 12kW Bosch Heat Pump
Welcome @mickamills We too have an oversized 12kW Sa...
By Old_Scientist , 5 days ago
-
RE: My Powerwall 3 Consumes 3-4 kWh/Day in Self-Consumption: Is This Normal?
@caron I can confirm that the power usage of the PW3 is...
By Old_Scientist , 5 days ago

