Last seen: Sep 19, 2024
Hi Richard, welcome to the forum. Having zones with individual room controls may seem desirable and may possibly be a good idea with a gas or oil bo...
@crustydoodle On first assessment I believe that the problem may be associated with one or more of the temperature sensors and possibly the settings...
@crustydoodle Thanks for the data. I will have a look through the list and see if I can make any suggestions.
@jamespa I have some further improvements that I wish to make, but once completed I will post a copy for dissemination.
@crustydoodle Did you record the list of controller settings?
@cathoderay One of the benefits of using simulations is the ability to vary one parameter, whilst keeping others constant, to see the effect of that...
@cathoderay You are indeed correct that the subject is rather complex, and I agree with much of what you have stated, along with the need to test so...
Don't you find it rather itchy? 🙄
Those seem reasonable for UFH, though you may wish to optimise the settings during the heating season. I would suggest that you now go through all t...
@crustydoodle The photo shows that your system is operating in WC mode, so I would suggest that you watch the video below to see what settings have ...
@crustydoodle A photo of the main screen may indicate the mode of operation.
@crustydoodle Do you have a buffer tank within your system? I presume your installer did not supply a list of all the controller settings? I pre...
Latest Posts
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
This is a very interesting project, thanks for document...
By RHH1 , 14 minutes ago
-
RE: Boxt Heat Pump Installation Experience
Glad to hear another mostly positive review of BOXT, as...
By Ashfp , 39 minutes ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 4 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 4 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@toodles Fun fact the free electricity session is techn...
By Andrew J H , 14 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Thanks- interesting and useful observations and I did n...
By benson , 16 hours ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 22 hours ago
-
How to Zone with a Single Room with UFH
Hi all, I am currently looking at a project ...
By Renewables345 , 22 hours ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 1 day ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 1 day ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 2 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 2 days ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 2 days ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 2 days ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 4 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 4 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 4 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 4 days ago
