Last seen: Sep 19, 2024
Welcome to the forum. I'm not certain on the best way to add monitoring, there may be others on the forum who can help. Please provide details of ...
@iancalderbank Thanks for the info Ian. So has the system not been piped up as we would assume, and the information from the Samsung flowmeter is ...
I was the one who said 'not recommended', which may have been a bad choice of words. I was trying to use words that would not cause utter panic, befor...
It is difficult to provide definitive suggestions, since I cannot watch your system operate and see how it responds under different operating conditio...
@iancalderbank I forgot about your final requirement. Slowly ramping up the LWT for DHW production is indeed a good idea. The only suggestion th...
@iancalderbank You are indeed correct, calculating the required LWT from the OAT reading is a simple mathematical formula. I would suggest that you ...
@riponowl I would be more inclined to believe the MMSP flowmeter rather than the Samsung one. Also check that the direction of flow is correct, th...
Also try the same test with the controller in fixed LWT mode.
Well done Ian. If you can actually write to the Target LWT register, and it retains the setting, then this would probably be easier than modifying t...
@riponowl Please provide details of the MMSP installed along with close-up photo's if possible.
How many water pumps do you have and where are they located? Close-up photo's may help.
Good point Ian.
- 26 Forums
- 2,177 Topics
- 47.9 K Posts
- 52 Online
- 5,748 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
@benson Possibly but when I looked on heat pump moni...
By Papahuhu , 21 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
Our region has increased to 14.794p which is a 14.6% in...
By Old_Scientist , 4 hours ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
Honestly I think that's a waste of time in almost all c...
By JamesPa , 8 hours ago
-
RE: Boxt Heat Pump Installation Experience
Glad to hear another mostly positive review of BOXT, as...
By Ashfp , 9 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 12 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 13 hours ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 1 day ago
-
How to Zone with a Single Room with UFH
Hi all, I am currently looking at a project ...
By Renewables345 , 1 day ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 1 day ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 2 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 2 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 2 days ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 2 days ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 3 days ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 4 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 4 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 4 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 4 days ago