Last seen: Nov 3, 2023
@derek-m basically goes to 22mm after the valve. Been pretty busy lately and haven’t had a chance to check rad sizes and such yet.
@derek-m will have a look at that tomorrow. I do know they were all replaced with Purmo ones I believe as had column cast iron sort of ones before. I ...
@allyfish I can’t remember what the WC settings are believe I just turned it on as it was off. And set the flow to 45c if I remember correctly. Will g...
@derek-m took the actuators of and checked the valves manually and they are definitely closing. I originally thought they weren’t closing all the way ...
@allyfish @allyfish I manually operated the valve after I took the reading and the pipework past the valve become hot fairly quickly. So would presume...
Valves and outdoor unit:
@allyfish I am not sure on the calculations as they were never given to me. I have just dug out all the paperwork left with me after the install. I wi...
@derek-m Yes all the rads get hot. I have just done an hour long test calling for hot water. there has been no heat demand today, currently set at 18c...
Thanks for the replies guys. Derek-M, I did manage to get WC on and turn the system temp down to 45c as was set to 55c. Did that last year as it ke...
Hi all, I have had A ASHP for just over three years. Was so glad I stubbled upon this forum as seems to be a wealth of knowledge! Daniel
Latest Posts
-
I’ll defer to @pirate-rich and @nigel-d and @ian-e on t...
By Mars , 10 minutes ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@nickhorne Unfortunately not. We take the "normal" IOG ...
By HCas , 20 minutes ago
-
RE: Mixture of copper and plastic CH pipework. Will it be ok, or need changing?
In principle yes. Some heat pumps (I think including D...
By JamesPa , 1 hour ago
-
RE: New Fogstar 15.5kWh upright solution
For the common benefit, a quick update on this. Fogs...
By Batpred , 1 hour ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
That all sounds promising, the right people, who hopefu...
By JamesPa , 2 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Some of the circuits in my home are not protected by RC...
By Batpred , 2 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@editor I had to deal with E.ON Next while proces...
By TechnoGeek , 3 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Aqara sells some inexpensive hubs (usb dongle size) tha...
By Batpred , 4 hours ago
-
RE: Extend the colder range of the weather compensation curve?
@thebinman In answer to this and personal...
By TechnoGeek , 4 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
And here is what the Homely plots say for the last few ...
By Toodles , 5 hours ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey I’m always watching 👀My Clivet cont...
By Mars , 11 hours ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard That's probably fine, provided as you say...
By GrahamF , 12 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
16Kw AIROSD Manufacturer: Foshan Model: QBKFXFC-...
By Polar bear , 12 hours ago
-
Just a suggestion but upload your images to an AI agent...
By RadWhisperer , 14 hours ago
-
RE: Daikin Wireless Thermostat
The switch from WDC to LWT i.e. pure WC is fairly strai...
By RadWhisperer , 14 hours ago
-
RE: Bosch CS5800i 5kW - Experience So Far
Thank you for your continuous research, and posts. As y...
By ectoplasmosis , 22 hours ago
-
RE: Trying to understand my Nibe F1245
@barry-sharp, is this something you could help with?
By Mars , 23 hours ago
-
I signed up for this, I think it will be a good one. Al...
By ASHP-BOBBA , 1 day ago
-
RE: Heat Loss v Outside Air Temperature
Ideal conditions to collect the data! Although the left...
By cathodeRay , 1 day ago
