Last seen: Feb 6, 2025
@cathoderay thanks for your reply. This is what I’m a bit confused about. I am able to change the number on the left front screen (currently at 40), ...
@batalto fab- thank you! Which numbers am I looking at on the operation screen which will indicate the actual flow temperature? what does the fixed...
@batalto more questions! I am really confused as to whether the system is running on the weather compensation that I set in serviceman or not. I hav...
@batalto great- thank you. I’ve got the app but it doesn’t seem to have much on it so not sure if I’ve got the right one!
@batalto thanks for the warning!! so I’ve turned off the weather compensation setting on the controller and adjusted the settings on ‘serviceman’ to...
@batalto thank you 👍🏻It doesn’t change the flow temp on the front of the control panel- is that correct? any idea what temps to start at and how to ...
@derek-m many thanks for your reply and all your help to date! That makes a lot more sense. Will see if I can find anything on YouTube and pop a separ...
@derek-m thanks for your reply. I have increased the flow to the coldest room and it goes up to 2 at max. Will monitor the temp over the next couple h...
@derek-m morning! I am just having a look at all the flow rates for the system as you advised. None of them are set to above 2 at the moment. Once I ...
@derek-m I’ve done as advised! I couldn’t see any numbers on the adjustment but it was on the max so I’ve turned it down a bit and will see next time ...
@iancalderbank thanks very much. This is really useful, at least I know what to ask for now with regards to the immersion control. I really do appreci...
Latest Posts
-
RE: Cooling with Samsung Gen6 and Flow error
@iaack I've got cooling mode on the radiator selected, ...
By EcoBaker , 1 hour ago
-
@heacol thanks for confirming we can only hope NAPIT ag...
By Bart , 1 hour ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@jeff And now for something I have never noticed before...
By Toodles , 3 hours ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@editor If it is of any interest, we had the BUS grant,...
By Toodles , 1 day ago
-
Sorry to hear that @bruce. Sadly I’ve heard from multip...
By Mars , 2 days ago
-
RE: Crystal Ball Time: Communal or even Area Energy Storage?
I am invested in a couple of listed energy storage fund...
By Old_Scientist , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
That would be my biggest commitment -time to gain great...
By SUNandAIR , 2 days ago
-
RE: Who has a V2G EV installation
As has been discussed on other threads, trying to justi...
By Majordennisbloodnok , 3 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Thanks @mikeh. Then I will also go back to non smart ta...
By ChandyKris , 3 days ago
-
RE: Location of hot water isolation valve on cylinder
@transparent Thank you so much and very helpful. Earlie...
By rossowheels , 4 days ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
It does indeed look like that, @skyefarmer. There is ...
By Majordennisbloodnok , 4 days ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 5 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 5 days ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 6 days ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 6 days ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 7 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 7 days ago
