Last seen: Mar 2, 2025
Interestingly, when I put the settings back to WC I get error E121. Upon looking this up in the manual it says "Short-or open- circuit error of the...
Okay, many thanks for all of your help. I'll update if I find anything from Samsung. Thanks again. Much appreciated.
Right, finished timing. Now back to 8 mins on 20 seconds off again. Flow temp 28.1 set to 30 Indoor 22.1 Outdoor 6.5 Room temp 19
@derek-m none. I've just followed what it said in the video link that I sent then set to 35 now set to 30 and timing shut downs as it has turned on an...
Room temp is slowly climbing. Up to 19 now.
Measurements in brackets are on 35 flow temp setting.
Here you go
So, it appears to run constantly but at quite high power usage of 1.9kw instantaneous power. Rads feel warmer to the touch but room temp stays at a...
Okay, that's done. It was already on standard temperature "water outlet". Could that have been an issue?
Is this what you mean?
I'm struggling to find where to switch to fixed LWT mode. 🙈 Although, whilst looking through the manual I found the page about removing the room sta...
@derek-m overnight it was 4 degrees and it has struggled to keep 18. The house is at 17.5 this morning. COP is down to 3.3 and it's using more power a...
- 26 Forums
- 2,238 Topics
- 49.8 K Posts
- 594 Online
- 5,900 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
@egp01 interesting. I hadn’t heard of adia. Looks a bit...
By jords , 46 seconds ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
@benson - that looks encouraging. The all important IAT...
By cathodeRay , 4 minutes ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
This will differ from house to house depending on how i...
By JamesPa , 21 minutes ago
-
RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire
The Water Outlet temp on the controller screen will dis...
By Mike H , 47 minutes ago
-
Do you need the DHW tank as high as 50°C @egp01 ? Ha...
By Transparent , 2 hours ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
@old_scientist Just to say that during our retrofit, we...
By Toodles , 2 hours ago
-
RE: Daikin Altherma 3M ASHP and British Gas Hive Home
We have a Daikin EDLA08 8kW monobloc (DHW is handled se...
By Toodles , 3 hours ago
-
@old_scientist @jamespa So this was last nights DHW r...
By bontwoody , 3 hours ago
-
-
@springswood we install these nationwide and I have the...
By dgclimatecontrol , 4 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
Just returning to this issue after a few days working i...
By Mike Patrick , 5 hours ago
-
RE: Renewables & Heat Pumps in the News
Back again to the Spanish blackout this was in the E...
By Judith , 7 hours ago
-
RE: DESNZ doing a survey which asks the right questions!
Fair comment. I have a feeling that ratings more gen...
By JamesPa , 10 hours ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
@jancold Not a plumber but I believe that i...
By RadWhisperer , 10 hours ago
-
Thanks! My consumer unit collection is ready with the W...
By Batpred , 13 hours ago
-
RE: Solar inverters - where does the energy go when clipping?
Since the combination of fitting plus scaffolding makes...
By Judith , 21 hours ago
-
RE: Designing my house system with a mix of air to air and air to water
@jamespa Cheers James, it's great reading. In quite a f...
By pipebaron , 21 hours ago
-
RE: PV Panels on roof in Conservation Area
If there is any way you can determine daily oil consump...
By JamesPa , 21 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
attached is prelagged in case indicates anything. &nb...
By Crimson , 1 day ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Via the cloud and via the online, similar data is shown...
By Batpred , 1 day ago


