Activity
 
Notifications
Clear all
ChickenBig
@chickenbig
Member
Honorable Member
Joined: Apr 3, 2022
Last seen: Oct 12, 2024
Topics: 10 / Replies: 282
Reply
RE: Fogstar now stocking Seplos Mason boxes

@vaugi Really good prices, especially if you can claim the VAT back. They are down to Grade B cells only at the moment, but I'm guessing another conta...

2 years ago
Reply
RE: How to quickly top balance EVE 280 cells?

240A is a lot of current. I've taken a look at the Seplos Mason connector I bought from Fogstar (to connect with the horizontal old-style Mason box); ...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Indeed I've been going back-and-forth between using MCBs, MCCBs and fuse isolators. For my mother's system I've settled on fuses, just so I can point ...

2 years ago
Reply
RE: How to quickly top balance EVE 280 cells?

I say this because DIP switches need flipping, and often software is not tested to handle a changing number of usually fixed things (like batteries). ...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

One pair of wires (a colour and its white dashed companion); within the Ethernet cable they are twisted together to reduce noise.

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

I think analog electronics is difficult; capacitance or noise from other wires makes things just a bit more difficult. Getting things to balance is im...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

@misterb There should not be a CT clamp around the cable to the inverter; it knows how much current it is pushing out. There needs to be a CT clamp ...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

@vaugi Yes those Mersen isolators are what I would go for (or else the Jean Mueller NH00 isolators which look to have better lug protection ... but do...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

I also wonder about the battery isolation. From the photo is not clear, but from the dangle of the cables I think it breaks just the positive wire. No...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

So your various consumer units are fed off these Henley Blocks. What does the white box at the top (with the cover closed) contain? And what is the Wy...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

Any chance of photos of the CT clamps and the cables which go back to the Sofar inverter (in particular is ethernet cable used, how long the cable run...

2 years ago
Reply
RE: My experience with the Selpos Mason DIY kit

It was just your picture of the inverter shows to set of flexible cable trunking connecting to the right had side of the unit. I could not quite make ...

2 years ago
Page 13 / 25
Share:

Join Us!

Trusted Installers

Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.

✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available

👉 Find your installer now!

Latest Posts