Last seen: Apr 24, 2025
@ashp-bobba and @jamespa - thank you both for all your help with this, it's much appreciated. I fully understand it's not easy to see what's going on ...
@ashp-bobba - yes that all looks correct. Pump 1 is on the flow and Pump 2 is on the return.
@ashp-bobba Thanks. I've checked the arrows and confirm both point in the correct direction. I note your concern over whether both are needed. Assum...
@davidnolan22 - Screenshot of energy input/output attached. System was commissioned on 8th April. Note: value for 16th is significantly higher sin...
@ashp-bobba - your arrows on the picture are correct. I've followed the pipes just now and confirmed this. How could I check the pumps are insta...
@jamespa - Yes, 0.5bar is the max on that bypass valve. Range = 0.1 - 0.5 bar. How would I validate that the pumps aren't fighting each other? T...
@ashp-bobba - thanks for the detailed thoughts. I'm aware that my rads upstairs seem to be working well and I have a reasonable density of rads in n...
Yes - the return pipe is the one with the filter and is showing in the picture.
Additional photos of the system here - you can see how hard it is to follow the pipes (but at least it's a nice compact install like I asked for!)
Heat Loss Calcs and a pic of the system included here:
@jamespa - yes, looks like I made a mistake on the diagram. I asked for the install to be quite compact in a corner of the garage so it's a little tri...
@jamespa - Property is a 1990ish 3 bed 2 story semi-detached house. Fully double glazed. Only about 100mm of loft insulation which I already plan to d...
Latest Posts
-
RE: Have Consumers Been Lied to About the Efficiency of Heat Pumps Made in China?
The actual impact on device functionality = zero. The a...
By Pavel , 11 hours ago
-
RE: ASHP heat output monitoring
I installed the heat pump in December '24, so the data ...
By Carlo , 16 hours ago
-
There are some projects looking at how smart meters and...
By Jeff , 22 hours ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Yes, I use Homely, as to whether Daikin is u...
By Toodles , 1 day ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 2 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 2 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 3 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 3 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 3 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 4 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 4 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 4 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 5 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 5 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 5 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 6 days ago
