Last seen: Nov 16, 2025
I agree with most of the points, but the 1.18 factor is there, as the average difference between the Midea volts x amps value and the external kWh met...
The two charts together are intended to compare the energy in predictions from your model (upper chart) and my regression equation (lower chart) again...
We are in effect using the same method, observed with setback vs expected without setback. The general method of comparing observed vs expected is wid...
Couldn't resist one final peek...and this really is the last one, just to, I hope, clear this up: Exactly, they compare observed with setback aga...
@jamespa - thanks. We cross posted - as I said, I'll be back on the case before too long!
@derek-m - thanks, and I agree, images can convey a lot of information that our human brains can take in very easily. The two charts compare the act...
All the calculations (formulas) are in the python scripts, the raw data file is a csv file and so can't contain formulas. There are two scripts, the m...
I'm posting these charts for discussion, not as a conclusion. They have not been easy to produce. I wanted to get all the data on one chart, but it en...
I very much agree. I hope now that we have said our bits, we can leave them behind us, and carry on forwards in a friendly and productive manner. I ...
Here it is (E&OE):
@jamespa - I don't doubt your good intentions, but once again your tone is too close to patronising for my liking. I am a doctor who has done some epi...
@derek-m - I suggest you have to accept what @sunandair had the balls to say recently, that (I paraphrase) it can feel to people who post observationa...
Latest Posts
-
RE: Renewables & Heat Pumps in the News
@editor This is why we seasonal commission, BTW seasona...
By ASHP-BOBBA , 44 seconds ago
-
RE: What is the relationship between flow rate and system balancing?
Im noit a heating engineer, but I will have a go anyway...
By JamesPa , 11 minutes ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
I did check and I was subscribed, still am. Didn't rec...
By AndrewJ , 37 minutes ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred But you can still claim on your credit card...
By Bash , 46 minutes ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
@colinc good luck with your project! UFH is the absolut...
By Judith , 2 hours ago
-
RE: Electricity price predictions
The answer must be on continental scale interconnects.....
By Batpred , 2 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
@crimson This youtube might be of help The narrato...
By IaAck , 2 hours ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
Our Government doesn't set oil prices (because we dont ...
By JamesPa , 2 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
@transparent, ooh, I'm going to go through the Retrofit...
By Mars , 16 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@hcas Just wondering if/where Ideal might be on your de...
By simonwig , 20 hours ago
-
RE: UFH downstairs and radiators upstairs balancing question
I wonder what the logic of this was, that will be the c...
By JamesPa , 1 day ago
-
@judith I haven't noticed any noise myself yet, nor my ...
By Eliuccio , 2 days ago
-
RE: Ecodan ASHP Low COP and Unstable Compressor Frequency
Thanks for the reply and the welcome ! Locat...
By lukewarmbath , 2 days ago
-
RE: Bosch CS5800i 5kW - Experience So Far
@ectoplasmosis Buderus is a subsidiary of the Bosch Gro...
By Steelbadger , 2 days ago
-
RE: Confusion over Octopus Tariffs
@agentgeorge I can’t recall when and the details but Co...
By Toodles , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@technogeek Yep, the same here. Toodles.
By Toodles , 2 days ago
-
RE: Maximising Home Automation: Integrating Octopus Energy & More
Thank you and I agree most people can stay clear of net...
By Batpred , 2 days ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey glad you got it sorted and agreed- being ig...
By benson , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
@agentgeorge it has got 2, the other bleed screw is the...
By AdamK , 3 days ago
