Forums

Forums
Members
cathodeRay
Activity
 
Notifications
Clear all
cathodeRay
cathodeRay
@cathoderay
Moderator
Famed Member
Joined: Feb 28, 2022
Last seen: Sep 2, 2025
Profile Activity
Topics: 17 / Replies: 2084
AllTopicsReplies
Reply
RE: 14kW Midea ASHP in an old leaky building

@batalto - you will have seen @derek-m's remarks about the PHE above, 3 degrees loss through the PHE from primary to secondary, which suggests that at...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

Exactly, it is the unfortunate use of a unit of time in the name that makes it seem like a rate, when in fact it is a quantity (that can then be produ...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

Interesting. I will see if anyone comments further on your 'ramblings' (which look very erudite to me), in the meantime, to clarify: ie kg/s = l/s...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

One final very simple, I hope, example: two convector heaters, one 1.5kW and one 3kW. The 3kW one delivers heat energy at twice the rate of the 1.5kW ...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

Indeed. I have read some accounts that do a sort of vanishing trick, where everything gets divided by itself, and all disappears into oblivion, though...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

As @robl has pointed out, it is easy to get confused by the apparent similarity between mph (miles per hour) and kWh (kilowatt hours) but there is the...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

@batalto (and others) - having cleaned the filter, and let the system run for a while, I am pleased to say the Midea controller is reporting a higher ...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

@batalto - OK, thanks, now done. I did turn the DHW off and room stat down. A fair amount of crud, but that is after almost two months of near continu...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

@batalto - thanks, I will check the filter and report back. Before I check it, presumably you need to turn the heating and DHW off before doing it?

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

@batalto - it would be interesting to compare flow rates, given we have similar units. I haven't cleaned the gauze filter, the one adjacent to the hea...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

Some measurements from 0800 this morning: Midea controller: ambient 11 LWT 41 RWT 35 capacity 0kW flow 0.83M3/H current 0A Room temps (design temp...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 14kW Midea ASHP in an old leaky building

@cycleneil - no, its controlled by an on/off room stat in the kitchen, currently set to 21 degrees, kitchen design temp is 19 degrees, so most of the ...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Page 169 / 176
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →