Forums

Forums
Members
BobTSkutter
Activity
 
Notifications
Clear all
BobTSkutter
@bobtskutter
Member
Estimable Member
Joined: Jan 11, 2025
Last seen: Apr 7, 2025
Profile Activity
Topics: 1 / Replies: 93
AllTopicsReplies
Reply
RE: Red Expansion Tank

No it shouldn't, the pressure should stay fixed at what ever you set it to - which is normally about 1.5bar. It should never go to zero and back up t...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Red Expansion Tank

It sounds to me as though the bladder inside the expansion tank has failed. I recommend you get this checked as soon as possible before excessive pre...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ASHP + two cylinders - possible?

@dr-h I'm not a heatgeek professional (although I am a geek 😉 ) The heatgeek "pink cylinder" is a thermal store with a coil inside. The water fr...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Is My Midea Heat Pump Inherently Defective?

That'll do it 😉 Can you go lower? Bob

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: New to world of ASHPs: Ideal Logic Air Monobloc heat pump 8kW questions

OK, please forgive me, what does that mean? Using less what? Insulation? The installation manual for the Ideal Logic Air says there is a temperatu...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: New to world of ASHPs: Ideal Logic Air Monobloc heat pump 8kW questions

That insulation doesn't very good to me, maybe others can comment. The last picture is different to one of the earlier ones. There seems to be a pa...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: New to world of ASHPs: Ideal Logic Air Monobloc heat pump 8kW questions

OK, so...completely by accident I was reading the installation manual for this heat pump. The manual says it has a "cold start protection mode". "...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: New to world of ASHPs: Ideal Logic Air Monobloc heat pump 8kW questions

Hello, please can you post some pictures of the pipework as it comes out of the back of the heat pump, up the wall and into your house. It looks as t...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Is My Midea Heat Pump Inherently Defective?

The flow restriction to your living room radiator is likely to be the pipes and valves. Swapping the radiator for a fan coil might not give you addit...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: 4 port buffer tank connections

You need to adjust the surface emmissivity setting of your thermal camera. Try this, assuming you have a metal kettle with a polished exterior surfa...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Controversial opinions - pure weather compensation, buffer tank, heat loss, oversized heat pumps

Here's a quick spreadsheet I put together that shows how compressor discharge temperature varies according to pressure ratio. The data is based on P...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Controversial opinions - pure weather compensation, buffer tank, heat loss, oversized heat pumps

Just a thought, do you have underfloor heating? The comment "started cycling as the return temp increased" makes me think you're seeing a benefit of...

5 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 3 / 8
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts