Last seen: Mar 22, 2025
Update for those following this thread.Finally got the 'tech guy' from the installers to email me. I sent him the plan the surveyor had done, which w...
@derekdeleon The legionella cycle is on a Tuesday and I took the photo on Saturday, so not it's not that.Had a look yesterday and the DHW was set to 4...
@lenny Thanks for this info. It's certainly something to investigate after ruling settings out.
@old_scientist Thank you so much for this info 🙏🏻 I'm still in the very early stages of getting to grips with it all.The booster is s...
@bontwoody The tank is a Kodiak Joule Smart Pre Plumb. Can find no mention of temp sensor anywhere online or in the installation manual. I did find ...
@bontwoody Absolutely no clue (no surprise there!). How do I find out?
@bontwoody if the tank blows up or sets on fire I'll track you down and haunt you 👻😆
@bontwoody thank you oh wise one 🙏🏻 😉
@jamespa I haven't forgotten 🙂 But I want to talk to the tech chap at the installers before I start altering the system, just so they can't a...
@broadsman Not the faintest clue! When I read about how to change the water law settings it never mentioned changing the Heat to Auto, so I've just l...
@jamespa @bontwoody I can't just input the proper floor areas on the installer calc as he missed out 2 windows and patio doors. So I used this online...
- 22 Forums
- 2,032 Topics
- 44.3 K Posts
- 33 Online
- 3,237 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Agile: average import cost vs other tariffs?
@toodles thanks for the analysis. I'll be really intere...
By Old_Scientist , 12 minutes ago
-
RE: Efficiency Concerns on newly installed Mitsubishi Ecodan 8.5kW
Welcome to the forums. It’s clear that you’ve taken t...
By Mars , 58 minutes ago
-
RE: help sizing rads based on room by room heat loss
By JamesPa , 2 hours ago
-
Hi Thanks for the reply, the walls are being constru...
By Fingers , 3 hours ago
-
RE: ASHP Ecodan L9 error - No Heating but Hot Water
@phoenix15 I'm no plumber so please don't take this as ...
By dnagre , 4 hours ago
-
RE: Is this normal? Click of the DHW returning to space heating
@grantmethestrength Oh sorry to hear that, there should...
By ASHP-BOBBA , 8 hours ago
-
@ashp-bobba TBH the ladies are rather disorganised, so ...
By Cathyem1 , 8 hours ago
-
The Rise and Fall of Europe’s Most Generous Green Subsidy
This story came to my attention thanks to Graham Hendra...
By Mars , 8 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
And for those of us without an automatic irrigation sys...
By Majordennisbloodnok , 8 hours ago
-
RE: Hitachi Yutaki SCombi Heat Pump - Thermal Off's
From the Full SAP Report: Space heating requirements:...
By trebor12345 , 8 hours ago
-
Logically, the lower frequency = more gentle, yes, but ...
By SUNandAIR , 12 hours ago
-
RE: Ideal Logic ASHP - change from 55°C to 35°C Heating?
Good point. I’ll keep my eye on the manifold temperatur...
By Tomdad , 15 hours ago
-
RE: How hard and expensive would it be to change panel and add battery?
@transparent It is a setting that Octopus make via the ...
By Toodles , 15 hours ago
-
RE: Performance of Heat Pumps in Mild Weather
@heatgeek The flow rate isnt controlled by Mitsub...
By RobS , 18 hours ago
-
RE: Say hello and introduce yourself
I might put a couple of speakers in the ceiling if fund...
By Fingers , 1 day ago
-
RE: Bathroom Radiator replacement
@rob-nezard can you please offer your professional advi...
By Mars , 2 days ago
-
-
RE: Questions on my Hitachi Yutaki SCombi Heat Pump
OK, thats good and low. With low flow temperatures lik...
By JamesPa , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa “They are all equal but, some are more equal t...
By Toodles , 2 days ago
-
RE: Is it KISS or constant – weather compensation vs. set flow temperature?
@cliffhanger Mine has a 'space heating off' setting! O...
By JamesPa , 3 days ago