Last seen: Jul 31, 2025
@netdonkey Sorry, one more thing, I note you say the system was installed in June 2024? if so, you are still well within your warranty and under HIES ...
@netdonkey I think if what you did just now made the system run for longer then it is air in the system and your flow may now have improved. As with...
@netdonkey Yes, the pump body is installed the correct way but the head (front of the pump is the wrong way), before the pump is installed it should h...
@netdonkey Reading the manual it looks like rotating the face is just to be able to read the interface, this instruction manual says to bleed to...
@netdonkey I am sorry to say, but I have just gone through the pictures again and although I cannot see the face of the pump I can clearly see the ...
@netdonkey We have a Evosta 3 set to fixed curve regulation mode level3. Is this correct? It looks like the Evosta has been installed upside dow...
@netdonkey I think you have an air lock, a restriction or for some reason a lack of flow.
@netdonkey Most 3 port valves dont look like they are all the way over but they are. You can ignore that lever for now. It looks like the arrows I ...
@transparent agreed. The labeling looks good.
@transparent So, as you would have it, its the law for exactly this in commercial applications over a specific size job under CDM regulations. Commerc...
@netdonkey let me know the make and model of the cylinder and I will check the options for the format of pipework layout.
@transparent Hello, yes thats correct or at least it appears to look like it, this is the flow sensor that needs to be on the return pipe back to the ...
Latest Posts
-
RE: 300 Liter Tank - Do I have to heat it all?
Cross references for @martingale Background discussi...
By Transparent , 2 hours ago
-
RE: ASHP heat output monitoring
Thanks. It may be just Vaillant, not Grant, I just had ...
By cathodeRay , 2 hours ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Oh Good! Pleased to help if I can! Regards, ...
By Toodles , 12 hours ago
-
It's unclear to me how the Smart Control project work b...
By Transparent , 12 hours ago
-
RE: Have Consumers Been Lied to About the Efficiency of Heat Pumps Made in China?
@pavel, this isn't about discrediting Chinese products....
By Mars , 13 hours ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 3 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 3 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 3 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 3 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 4 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 4 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 4 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 5 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 6 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 6 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 6 days ago
