Last seen: Oct 19, 2025
@dgclimatecontrol yes the wall fixings are mostly around the flexis I think the bottom one is actually on the pipework leaving the rear of the unit. T...
@toodles it’s just doing an ECO water run as we speak and power consumption is about 1500w and I can only here the humming in the utility. The rumblin...
@jamespa well I set it to on yesterday and have a night setback of 18 until 6am. This morning at about 6:15am it roared up and I could hear the hummin...
What I’m trying to say is I want the solar inverter on the pw3 to just export not charge the batteries or for the batteries to affect the FIT meter, a...
Might not be to bad as I think it’s just the export limit not installed inverter limit. I’ve got a 4kwp array on another 3.68kw inverter attached to a...
@jamespa Here’s a pic of part of the pipes. They have used some wall supports on the pipework before the flexis and even in the middle of the flexi...
@jamespa in eco or NR mode it is pretty silent until i go in the utility room about 4m away from the outside wall the unit is sat near, then i can hea...
@jamespa yeah im using the ECO mode, i did try combining it with noise reduction but apparently this doesnt affect the compressor as ECO takes precede...
@jamespa i did wonder if it was ok at 4.4 as in another thread an installer said summer hot water cop should be 6 which seemed a bit high. highest ive...
@drei ive kind of reached out to them already via email and comments on youtube but they have stopped replying to emails and essentially said as it wa...
- 26 Forums
- 2,228 Topics
- 49.5 K Posts
- 133 Online
- 5,890 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Twin 10kw Grant Aerona Volumiser Tanks using lots of power
The Grant Aerona3 external volumisers are insulated uni...
By Grantmethestrength , 3 hours ago
-
RE: How good is the app support for your heat pump?
The Bluetooth signal does not reach due to the distance...
By Batpred , 3 hours ago
-
Samung 16kw 5 months in - Happy with heat and DHW but some questions
Where to start? In brief we are happy with the system...
By DowallyDrifter , 4 hours ago
-
Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
I have a Mitsubishi Ecodan EHST20D-YM9D with PUHZ-SWM80...
By Johj45 , 4 hours ago
-
RE: Electricity price predictions
Currently we are a net importer of electricity, and one...
By Jeff , 4 hours ago
-
RE: Replacing knackered oil boiler with ASHP - Perthshire
@jamespa just confirming that after 5months with the 16...
By DowallyDrifter , 5 hours ago
-
RE: Struggling to get above 3.3 on heating
The first chart in your post above shows average 0.25kW...
By JamesPa , 6 hours ago
-
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel
Im just in the process of connecting up my mixergy cyli...
By bontwoody , 12 hours ago
-
Unless anyone can tell me differently, there appears to...
By DowallyDrifter , 15 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
I run my Vaillant on either expanded mode (either end o...
By JamesPa , 17 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
on a facebook thread someone has comented to the effect...
By AdamK , 1 day ago
-
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
Wanted to add an update. As I am running HomeAssistan...
By bubuontheweb , 1 day ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
You are correct you dont need the second pump if there ...
By JamesPa , 1 day ago
-
RE: New Fogstar 15.5kWh upright solution
From my experience with inverters from different Far Ea...
By Transparent , 1 day ago
-
@bontwoody Thank goodness you are ‘back on-line’ so to ...
By Toodles , 1 day ago
-
RE: Automation options to maximuse efficiency & ToU tariffs
@majordennisbloodnok Seems reasonable. It would be m...
By Batpred , 1 day ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@hcas OK Thanks. Will do.
By bontwoody , 1 day ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
@transparent Thank you for a very comprehensive, tim...
By Batpred , 1 day ago
-
RE: Isolating the system for a planned power cut
@transparent 😊 I may have lost you there.. I ...
By Batpred , 2 days ago