Forums

Forums
Renewable Heating
Thermostats, Volumi...
Homely vs TaDo for ...
 
Notifications
Clear all

Homely vs TaDo for a heat pump. Does Homely only optimise twice per day?

 
Page 2 / 2
Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
Last Post by HCas 1 year ago
17 Posts
5 Users
8 Reactions
3,727 Views
RSS
Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2065
04/04/2024 7:08 pm  

@anels HelloAnels, I have an LLH and from the testing I have carried out, it is fairly efficient (results published some weeks back in RHH) so am not about to rip it out! When the service engineer from Daikin carried out the first annual service, he commented that the primary pump sees ver little resistance and the whole system runs very cleanly. The last few weeks has shown a COP (via the Homely Dashboard info) of 4 - 4.8 and I think this is quite respectable especially as we run the whole house at 22.5 degrees C. 24/7. The Homely controller also controls the secondary pump and has the advantage that it stops the pump when not required unlike the Neo Air which kept it running 24/7!

The Onecta app is in my opinion of very limited use as very little information beyond OAT and consumption figures appear in the details. As Homely has taken over all functions around LWT and WC plus anticipating temperature drops and rises and can use the Agile API to monitor tariff use to best advantage, combine it with weather warnings etc., the Smart+ mode would be very useful if working straight off the grid. With a battery, this is less critical. We have been using the Smart mode now for a week and more and our setting of 22.5 degrees C. never drops below and only rises by 0.6 degrees for a short time before moderating itself again. Overall, we are very impressed with it. (Disclaimer: I paid full price and do not have any monetary or share interest in EverGreen Energy / Homely!)

Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
👍
1
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 625
05/04/2024 10:11 am  

@toodles

"A COP of 4 - 4.8"..............??? 😯 I struggle to get much above 2.


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2065
05/04/2024 10:25 am  

@morgan I am assuming that the internally derived data is reasonably accurate - but it is all I have to go by anyway. Checking this morning, the COP is 5+ but then, it isn’t the weather to tax the system very much - even for an IAT of 22.5 degrees

IMG 0625

C.!


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
👍
1
ReplyQuote



Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2065
05/04/2024 10:28 am  

I have also been experimenting with 2.5 degrees C. setback at night as you will see in the graph, but with good insulation, the temperature doesn’t drop much anyway. Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
👍
1
ReplyQuote
 HCas
(@hcas)
Reputable Member Member
Joined: 1 year ago
Posts: 105
08/04/2024 12:18 pm  

@morgan Are you using Mitsubishi controls? With weather compensation? And is your heat pump WIFI enabled?


This post was modified 1 year ago by Mars

CEO and co-founder at HavenWise


   
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  homely (5) , tado (2) , heat pump (21) ,
Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →