Solar Edge Inverters, returns recycling policy
Sharing this for info, which was posted on LinkedIn by a disgruntled Solar Edge installer. They are no longer accepting faulty inverter returns but asking installers to ‘recycle them’ - easier said than done without cost to a tradesman.
How irresponsible of them. Inverters should be repairable electronic items, not just thrown away. They claim they are doing this as part of their ‘sustainability policy’ - make of that what you will.
Ridiculous! It’s the complete opposite of sustainability, and the fact that most of these SolarEdge inverters will now end up in landfill is nothing short of environmental negligence. How is this even acceptable? Only thing I will say is that this post is from the U.S. and I wonder if this disastrous policy applies globally?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
It would be interesting to see how SolarEdge are claiming to comply with their WEEE obligations under UK legislation. It may yet be that they can't adopt that strategy in this country; let's see.
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
Posted by: @majordennisbloodnokIt would be interesting to see how SolarEdge are claiming to comply with their WEEE obligations under UK legislation. It may yet be that they can't adopt that strategy in this country; let's see.
and the EU WEE directive on which the UK version is based.
A quick Google suggests that it's the local distributor who is responsible for WEEE compliance. Solaredge appear to be trying to spin this as a 'Green' initiative but I suspect it is more to reduce their own return and disposal costs. I don't know the products to which the statement refers but perhaps they are encapsulated or otherwise not readily maintainable/repairable.
Agreed, @ianmk13.
Under UK WEEE legislation (and probably the EU equivalent although I haven't looked into that closely), both the manufacturer and the distributor have obligations. In this case, I suspect the local installer fits the category of "distributor" and therefore has the responsibility for disposing of the old kit. However, the manufacturer (the "producer" in WEEE terms) still has to register with a Producer Compliance Scheme and pay their share towards financing the collection, treatment, recovery and disposal of WEEE.
Long and short of it is that since SolarEdge's and the installer's respective WEEE responsibilities are already fairly well defined, I'm not sure any maneouvring SolarEdge might try would produce any significant benefit, but it'll be interesting to see.
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
- 26 Forums
- 2,118 Topics
- 46.5 K Posts
- 24 Online
- 4,522 Members
Join Us!
Latest Posts
-
@majordennisbloodnok Thank you. I have sent a very ster...
By El3b , 3 seconds ago
-
Fitting new shower valve ..........
This may be too generic but I need to change the ...
By Lenny , 2 hours ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
So the manual is correct and looks fine to me, to abbre...
By ASHP-BOBBA , 6 hours ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
Hi I, like others, avoid Amazon for ethical reasons....
By Topher , 7 hours ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 7 hours ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 8 hours ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 23 hours ago
-
RE: Is this just haze or something more?
@majordennisbloodnok I was giving a talk to primary sch...
By Toodles , 1 day ago
-
RE: Tesla Powerwall – More of a ‘Luxury’ Than an ROI Winner!
We had our Tesla Powerwall 3 (and Gateway) installed ea...
By Old_Scientist , 1 day ago
-
Indeed. With a battery its presumably the battery con...
By JamesPa , 1 day ago
-
RE: No-code, plug-and-play monitoring for your heat pump
To update an ESP device using ESPHome in Home Assistant...
By Grantmethestrength , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
Said I would pop back with a update. Only Mr Jesus h...
By Burtis , 5 days ago
-
RE: Buffers, hot water and cooling
Thats presumably heat pump DT, what about radiator DT a...
By JamesPa , 5 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Exactly the same here. We now have 13.5kWh ...
By Old_Scientist , 5 days ago
-
RE: Wood burner with ASHP - direct air?
This depends on the size of your wood burner and size/t...
By Lucia , 6 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn It's a not a buffer it's a volumiser which is ...
By Lucia , 6 days ago
-
RE: Is your heat pump insured?
To make things clear, lots of insurance companies cover...
By Lucia , 6 days ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 6 days ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 1 week ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 1 week ago