Forums

Forums
Sustainable Sidetra...
Safety, Regulations...
Smart smoke detecto...
 
Notifications
Clear all

Smart smoke detectors

 
Safety, Regulations, Tools, Plumbing & DIY Installations
Last Post by Transparent 3 years ago
3 Posts
2 Users
1 Reactions
1,450 Views
RSS
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3404
Topic starter 21/12/2022 11:58 pm  

We have smoke detectors the previous owners installed, and they’re all hardwired. I believe these units typically have a 10-year shelf life, which I think we’ll soon be approaching. Given that we have quite a lot of smart home tech in the house now, I was wondering if anyone’s installed any hardwired, smart home smoke detectors and what your experience has been like. Most of the smart ones I’ve found are not hardwired (just battery) - suggestions, thoughts feedback welcome. 

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
Quote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3404
Topic starter 22/12/2022 12:12 am  

As a related question, if I replaced our existing wired smoke detectors with battery operated models, is it quite easy to “patch up” the wiring once the units have been removed? Ie. can the wires just end up in a chocolate block type terminator?

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2458
26/12/2022 3:40 pm  

I have mains-operated smoke alarms in my house.

There's a 'signal' wire which carries the 'alarm-on' command to all others in the network.

I've doubled-up the use of this as an input to my Whole House Ventilation System.
When an alarm detects smoke, it kills the connection to the fans in the loft unit, thereby no longer blowing fresh air into rooms which may be alight. 😲 

This feature is not a mandatory requirement for domestic properties with MVHR, but I feel that it should be.

 

Yes @editor you can terminate wires if you replace a mains alarm with one that operates from battery. But screwed 'choc-blocks' are not permitted in ceiling voids any more.
You should be using a crimp/clamp style terminal, such as those made by Wago. They, in turn, should be held within an outer box.

image
This post was modified 3 years ago by Transparent

Save energy... recycle electrons!


   
👍
1
ReplyQuote



Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →