Notifications

Clear all

The Definitive Guide to Weather Compensation and Curves for Air Source Heat Pumps

Page 1 / 3 Next

Air Source Heat Pumps (ASHPs)

Last Post by Tim441 6 months ago

33 Posts

15 Users

11 Reactions

4,191 Views

RSS

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3385

Topic starter 28/10/2024 11:40 am

If you’ve been following our Homeowners’ Q&A podcast series, you might know that one of the most valuable takeaways has been around optimising the weather compensation curve for heat pumps. My discussions with experts – including a few off-topic conversations after the recordings ended – have highlighted just how nuanced and crucial this setting is for ideal efficiency. Since every home has unique requirements, setting the perfect weather compensation curve can be challenging but it's highly advisable that homeowners try to figure this out because it'll lead to cheaper running costs.

This thread is a space for sharing insights, experiences and questions around weather compensation settings.

For those starting out, I’ve attached the weather compensation curves issued with our Global Energy Systems 16kW Caernarfon heat pump to serve as a reference point.

Throughout October and November, ours is set to 0.2 which results in a flow temperature between 32-35C, which has comfortably maintained most of our property at 21C (apart from the TV room – our index circuit).

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

Quote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3385

Topic starter 28/10/2024 11:41 am

Please post your heat pump's weather compensation curves and data as a reference.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote

bontwoody

(@bontwoody)

Noble Member Contributor

Joined: 3 years ago

Posts: 836

28/10/2024 3:05 pm

@editor Im still experimenting with mine Mars, having made some changes to my house in the summer. My low end is 32C (at OAT of 15C) which is probably hotter than I need to keep the house warm but the minimum I can get away with before my heat pump starts to cycle as the radiators cant lose enough heat.

I suspect many people hit this problem.

My upper end will be evident after the winter 😉

House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60

👍

ReplyQuote

IRMartini

(@irmartini)

Estimable Member Member

Joined: 1 year ago

Posts: 74

28/10/2024 3:53 pm

@bontwoody

Exactly the same here.

“Anything worth doing, is worth doing right.”

👍

ReplyQuote

DavidAlgarve

(@davidalgarve)

Reputable Member Member

Joined: 2 years ago

Posts: 122

29/10/2024 1:34 pm

Hello Mars

4 bed large house in Portugal 16kW Mitsu. Still playing around and waiting to have buffer tank converted to volumiser.

Also pondering on PAR-WT50 wireless remote to let it do the thinking.

This post was modified 10 months ago 2 times by DavidAlgarve

👍

ReplyQuote

Judith

(@judith)

Prominent Member Member

Joined: 2 years ago

Posts: 373

30/10/2024 9:07 am

We’re on Vaillant’s 0.55 curve which means 42C at -2C and around 30C at an OAT of 15C.

The pump cycles about once an hour once it’s warmed up the house after set-back. The house upper limit is set at 21C (expanded mode for occasional solar gain) and the rooms are mostly at 20C (bedrooms less).

2kW + Growatt & 4kW +Sunnyboy PV on south-facing roof Solar thermal. 9.5kWh Givenergy battery with AC3. MVHR. Vaillant 7kW ASHP (very pleased with it) open system operating on WC

👍

ReplyQuote

Boycey

(@boycey)

Trusted Member Member

Joined: 8 months ago

Posts: 37

05/01/2025 8:35 am

Is there a weather comp curve for ecodan?

ReplyQuote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3385

Topic starter 05/01/2025 11:19 am

@boycey the curves for your Ecodan should be published in your manual.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote

Boycey

(@boycey)

Trusted Member Member

Joined: 8 months ago

Posts: 37

05/01/2025 11:49 am

@editor I can't find any, any other ecodan users here have a mitsibushi weather comp chart?

ReplyQuote

Gary

(@gary)

Prominent Member Member

Joined: 3 years ago

Posts: 350

05/01/2025 3:19 pm

The Ecodan WC curve doesn’t have presets like you see in other systems it’s fully customisable. So you can set the high and low end at any OAT and change the gradient as you see fit between those values

Like bontywood my low end doesn’t go below 32C to prevent cycling and is set at 45C at -10 which gives 37C at -2C

🤩

ReplyQuote

Gary

(@gary)

Prominent Member Member

Joined: 3 years ago

Posts: 350

05/01/2025 3:20 pm

🤩

ReplyQuote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3385

Topic starter 05/01/2025 3:30 pm

Posted by: @gary

↑

The Ecodan WC curve doesn’t have presets like you see in other systems it’s fully customisable. So you can set the high and low end at any OAT and change the gradient as you see fit between those values

I had no idea that was the case. Thanks for the clarification.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote