Forums

Forums
Renewable Heating
Air Source Heat Pum...
Setting different t...
 
Notifications
Clear all

Setting different temperatures throughout the day. Good idea for ASHP?

 
Air Source Heat Pumps (ASHPs)
Last Post by Tufty 2 years ago
4 Posts
3 Users
0 Reactions
1,549 Views
RSS
 Tufty
(@tufty)
Estimable Member Member
Joined: 3 years ago
Posts: 54
Topic starter 23/11/2023 6:07 pm  

Hi,

Ive got a Salus RT510 thermostat which controls the rads. Should I set a a standrad temperatures (19 degrees for example) across all 6 programmes? Or is it best to have different temperatures across different times of day?

Thanks



   
Quote
MikeFl
 MikeFl
(@mikefl)
Reputable Member Member
Joined: 2 years ago
Posts: 123
24/11/2023 11:49 am  

The standard advice is to only vary settings by a maximum of 2C throughout the day e.g. 20C when you're at home, 18C overnight, and 19C during daytime but house is empty. HPs cannot raise house temperature at the same rate a gas boiler would.

Whether this is good advice is open to (much) debate. The answer will probably be "it depends".


Grant Aerona 3 10kW


   
ReplyQuote
 iancalderbank
(@iancalderbank)
Noble Member Contributor
Joined: 3 years ago
Posts: 643
24/11/2023 4:30 pm  

as a general rule, in a moderate to well insulated house, keep variation as little as possible.  But, other factors are always in play:

- do you want it warmer in the evening for lounging comfort? 

- have a time of use electricity tariff?

If the weather compensation of the heat pump is perfectly configured i.e. the variation of the flow temperature against outside temperature  exactly matches the heat loss of the house at all outside temperatures, then the indoor temperature will never vary. of course, no setup is perfect. some heat pumps have load compensation as well as weather, meaning they can boost  / adapt their output if an internal temperature rise is requested.


My octopus signup link https://share.octopus.energy/ebony-deer-230
210m2 house, Samsung 16kw Gen6 ASHP Self installed: Single circulation loop , PWM modulating pump.
My public ASHP stats: https://heatpumpmonitor.org/system/view?id=45
11.9kWp of PV
41kWh of Battery storage (3x Powerwall 2)
2x BEVs


   
ReplyQuote
 Tufty
(@tufty)
Estimable Member Member
Joined: 3 years ago
Posts: 54
Topic starter 24/11/2023 5:16 pm  

Thanks guys. I will change my settings accordingly.



   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  

Currently viewing this topic 2 guests.

Share:

Join Us!

Login   Register

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →