Forums

Forums
Renewable Heating
Air Source Heat Pum...
Samsung ASHP owners...
 
Notifications
Clear all

Samsung ASHP owners what have you set your weather compensation to?

 
Air Source Heat Pumps (ASHPs)
Last Post by Old_Scientist 7 months ago
7 Posts
4 Users
0 Reactions
780 Views
RSS
 cyrusir
(@cyrusir)
Eminent Member Member
Joined: 2 years ago
Posts: 10
Topic starter 16/01/2025 10:51 am  

Interested to see what others are using (while realising its completely dependent on your house, the size of the unit etc)

Mine currently is low temp - 2 (2011) Max temp 15 (2012)

UFH highest flow temp 40 (2021), lowest 28 (2022) 

Rads highest flow temp 40 (2031, lowest 28 (2032)

 


   
Quote
 Alfapat
(@alfapat)
Reputable Member Member
Joined: 3 years ago
Posts: 182
17/01/2025 10:55 am  

Posted by: @cyrusir
↑

Interested to see what others are using (while realising its completely dependent on your house, the size of the unit etc)

Mine currently is low temp - 2 (2011) Max temp 15 (2012)

UFH highest flow temp 40 (2021), lowest 28 (2022) 

Rads highest flow temp 40 (2031, lowest 28 (2032)

 

Currently resetting Flow temps as per my thread adjusting lockshield valves.

Low temps -5c for Scotland

Max temps 15c

It has been 50c for years but experimenting after Lockshield settings with firstly 46c Now at 44c 

 

Over the last 3 days of consistant outside temps and adjustment to make three rooms 2 degrees below Thermostat setting of 22c average the cost hast gone up from £10-£12 . Ill be giving it another day but its not working so far.

 


   
ReplyQuote
TechnoGeek
 TechnoGeek
(@technogeek)
Reputable Member Member
Joined: 2 years ago
Posts: 129
20/01/2025 5:12 pm  

@cyrusir I have had a Samsung HP since 2023 but January 2025 is the first month we have had -2C and lower temperatures to enable me to finally trim my weather curve (water law in Samsung speak).

Mine is currently:

OAT 15C - Flow temp 37C 

OAT -2C - Flow temp 52C

My 12 Kw unit becomes a little unstable with flow temperatures lower than 37C plus the compressor cycles more. As Mr Hendra once said it can only modulate down to 40% its max capacity before the compressor starts cycling

 

Regards

5 Bedroom House in Cambridgeshire, double glazing, 300mm loft insulation and cavity wall insulation
Design temperature 21C @ OAT -2C = 10.2Kw heat loss
Bivalent system containing:
12Kw Samsung High Temperature Quiet (Gen 6) heat pump
26Kw Grant Blue Flame Oil Boiler
All controlled with Honeywell Home smart thermostat


   
ReplyQuote
 cyrusir
(@cyrusir)
Eminent Member Member
Joined: 2 years ago
Posts: 10
Topic starter 20/01/2025 5:35 pm  

@technogeek  

 

great thanks for the info!


   
ReplyQuote
 cyrusir
(@cyrusir)
Eminent Member Member
Joined: 2 years ago
Posts: 10
Topic starter 20/01/2025 6:20 pm  

@alfapat thank you!


   
ReplyQuote
 Alfapat
(@alfapat)
Reputable Member Member
Joined: 3 years ago
Posts: 182
20/01/2025 7:57 pm  

Not sure if this is working , smaller rooms a bit colder and larger a degree off the 22c . 
Having said that I observe that pump is on but only showing 1.5kw consumption on smart meter, now 2kw but only shows it’s cutting consumption but achieving target, which has been on since 3.30pm . 


   
ReplyQuote



 Old_Scientist
(@old_scientist)
Honorable Member Member
Joined: 1 year ago
Posts: 227
30/01/2025 6:23 pm  

I'm running a 'flat' WL curve of 32C (32C @ 15C OAT; 32C @ -2C OAT), and I then manually adjust LWT up and down on the controller heating screen. At the moment I'm run 32C during the day, set back to 30C overnight and boost to 35C during the cheap price Octopus Cosy slots, but I can tweak this depending how hot/cold the house feels.

Samsung 12kW gen6 ASHP with 50L volumiser and all new large radiators. 7.2kWp solar (south facing), Tesla PW3 (13.5kW)
Solar generation completely offsets ASHP usage annually. We no longer burn ~1600L of kerosene annually.


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →