Forums

Forums
Renewable Heating
Air Source Heat Pum...
Samsung Air Source ...
 
Notifications
Clear all

Samsung Air Source Heat Pump suddenly started drawing large amounts of current

 
Air Source Heat Pumps (ASHPs)
Last Post by iainched 1 year ago
7 Posts
4 Users
1 Reactions
1,044 Views
RSS
 iainched
(@iainched)
Active Member Member
Joined: 1 year ago
Posts: 4
Topic starter 28/02/2024 12:45 pm  

I have a Samsung AE160RXYDEG Air to Water Heat Pump that has operated happily for 3.5 years, including being serviced each year, that has suddenly drawing lot more current than normal. This is apparent because wiring at the pump's MCB in the house has started to melt without tripping the circuit breaker! Has anyone experienced this or can suggest where to look next bearing in mind that reconnecting the pump to the mains does not seem sensible?


   
Quote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
28/02/2024 12:55 pm  

I would suggest that you get an Electrician to check the wiring for bad connections and to measure the actual current with a clamp meter.

 

This post was modified 1 year ago by Mars

   
ReplyQuote
 iainched
(@iainched)
Active Member Member
Joined: 1 year ago
Posts: 4
Topic starter 28/02/2024 1:22 pm  

Thank you. The connections are fine, reinforced by knowing that they have not been touched in 3 years. The challenge is putting a clamp meter on a circuit that might well starting melting if turned on. I can see from a power meter in the circuit that the average current draw in cold weather was 5 Kw but this went up to a peak of 8 Kw.

PowerDraw

 


   
ReplyQuote



Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 4 years ago
Posts: 3323
28/02/2024 6:24 pm  

@iainched what size is your heat pump?

Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 iainched
(@iainched)
Active Member Member
Joined: 1 year ago
Posts: 4
Topic starter 28/02/2024 6:29 pm  

16 kW.


   
ReplyQuote
 SAEnergy
(@saenergy)
Trusted Member Member
Joined: 4 years ago
Posts: 17
28/02/2024 7:45 pm  

Posted by: @iainched
↑

I have a Samsung AE160RXYDEG Air to Water Heat Pump that has operated happily for 3.5 years, including being serviced each year, that has suddenly drawing lot more current than normal. This is apparent because wiring at the pump's MCB in the house has started to melt without tripping the circuit breaker! Has anyone experienced this or can suggest where to look next bearing in mind that reconnecting the pump to the mains does not seem sensible?

 

from that description it would seem to be badly terminated or failing connection at the MCB.  It’s relatively simple to sort out, replace MCB, trim cable to good copper and determinate being careful of tightening torque etc.  essentially an easy job for a standard sparkle. 

I would suggest that you check the service schedule includes an inspection of ALL electrical terminations relating to the ASHP.  This would be the same for checks in solar, battery an EV chargers which should also be tested in a regular schedule. 

 

Internationally recognised award winning installer of heat pumps and stuff


   
👍
1
ReplyQuote
 iainched
(@iainched)
Active Member Member
Joined: 1 year ago
Posts: 4
Topic starter 29/02/2024 12:25 pm  

Thank you. The advice to "replace MCB, trim cable to good copper and determinate being careful of tightening torque etc" has be actioned and all looks OK so far.


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  

Currently viewing this topic 1 guest.



Share:

Join Us!

Login   Register

Trusted Installers

Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.

✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available

👉 Find your installer now!

Latest Posts