Forums

Forums
Renewable Heating
Air Source Heat Pum...
Red Expansion Tank
 
Notifications
Clear all

Red Expansion Tank

 
Page 2 / 2
Air Source Heat Pumps (ASHPs)
Last Post by BobTSkutter 7 months ago
16 Posts
3 Users
5 Reactions
1,172 Views
RSS
 Richard24738
(@richard24738)
Estimable Member Member
Joined: 1 year ago
Posts: 90
Topic starter 21/02/2025 8:07 pm  

@bobtskutter Hi Bob. Daft mistake with the valve.

The red expansion tank is not attached to the hot water cylinder.

I can't find the PSV you mention on the heating side.

Filling the system from 0 to 1.5 did not take long although I did slow it down towards the end. I'm only guessing maybe 5 seconds and then a few more.

The installer did ask me to check the auto air valve on top of the buffer tank to see if wet. Totally dry and always auto open so I don't know if it's been venting air. Maybe that's it! 

A few weeks ago the system was drained down so maybe trapped air in the system has suddenly found it's way out. Hope that's the reason and why the pressure only dropped.

Will monitor the pressure over the weekend.


Install 13 April 2024 - 4 Bedroom Brick Detached - Heat Loss 9,281w, Design 45c at -2 - Ecodan 11.2kw R32 - 25L Buffer - 250L Telford Tempest HP DHW - All 16 radiators replaced - Auto Adapt - Mel-Pump app - Octopus Fixed Rate


   
ReplyQuote
 BobTSkutter
(@bobtskutter)
Estimable Member Member
Joined: 8 months ago
Posts: 94
21/02/2025 8:38 pm  

🙂  I'd love to know what you find out, please post the solution.

Regards

Bob



   
ReplyQuote
 Richard24738
(@richard24738)
Estimable Member Member
Joined: 1 year ago
Posts: 90
Topic starter 23/02/2025 2:17 pm  

@bobtskutter Hi Bob. Just a short update to say that the Red expansion tank guage is stable on 1.2 reinforcing my thought that it was air in system. It was drained down 4 weeks ago and maybe the release of trapped air was delayed or maybe I just hadn't noticed it.

I will still keep an eye on it though.


Install 13 April 2024 - 4 Bedroom Brick Detached - Heat Loss 9,281w, Design 45c at -2 - Ecodan 11.2kw R32 - 25L Buffer - 250L Telford Tempest HP DHW - All 16 radiators replaced - Auto Adapt - Mel-Pump app - Octopus Fixed Rate


   
👍
1
ReplyQuote
 BobTSkutter
(@bobtskutter)
Estimable Member Member
Joined: 8 months ago
Posts: 94
23/02/2025 3:48 pm  

Excellent, I'm glad it's settled down.

Regards

Bob



   
👍
1
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →