Notifications

Clear all

Method for monitoring ASHP usage/efficiency in real time?

Air Source Heat Pumps (ASHPs)

Last Post by Kev M 3 years ago

11 Posts

6 Users

2 Reactions

2,810 Views

RSS

Tufty

(@tufty)

Estimable Member Member

Joined: 3 years ago

Posts: 54

Topic starter 10/12/2022 5:11 pm

I have an Mitsubishi Ecodan ASHP that was installed 4 years ago. The Ecodan controller shows energy consumed/delivered, but I need to go outside to an outbuilding (where the Ecodan and cylinder is located) to view this. Is there a free/cheap app/technology that I can view this information on my phone for example?

Quote

Brooster

(@brooster)

Eminent Member Member

Joined: 3 years ago

Posts: 15

10/12/2022 7:25 pm

Do you have the MELCloud app?

ReplyQuote

Majordennisbloodnok

(@majordennisbloodnok)

Famed Member Moderator

Joined: 4 years ago

Posts: 912

10/12/2022 10:21 pm

Posted by: @brooster

↑

Do you have the MELCloud app?

Unless you have a new version of the app that I haven’t seen, it won’t give real-time energy usage stats; only previous day and before. You can see current temperature, but not how the HP is performing to achieve that temp.

105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs

"Semper in excretia; sumus solum profundum variat"

ReplyQuote

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

10/12/2022 10:38 pm

Posted by: @majordennisbloodnok

↑

Posted by: @brooster

↑

Do you have the MELCloud app?

Unless you have a new version of the app that I haven’t seen, it won’t give real-time energy usage stats; only previous day and before. You can see current temperature, but not how the HP is performing to achieve that temp.

You can see the current day; just overwrite the dates. You can keep the report open and press the energy button to update it. Not quite real time but close. At least I can, this is today so far (it's going to be expensive!). I have MMSP monitoring though.

This post was modified 3 years ago by Kev M

ReplyQuote

mjr

(@mjr)

Prominent Member Member

Joined: 4 years ago

Posts: 301

11/12/2022 12:38 am

The MELcloud API gets more data than can be seen in their app, including energy consumption and heat movement with about 2 minutes delay. Third -party apps like my melcloud-mqtt-bridge can feed that to home automation dashboards like domoticz or HA.

Another option is to connect your own device to the cn105 connector which will see real time but I think then you can't also use melcloud. Or you can fit your own sensors. Many options.

👍

ReplyQuote

Tufty

(@tufty)

Estimable Member Member

Joined: 3 years ago

Posts: 54

Topic starter 11/12/2022 8:38 am

Posted by: @brooster

↑

Do you have the MELCloud app?

Hmm, I dont, but Ive just Googled for it. Looks good, but do I need a seperate 'wifi controller' or is it already built in? (The Ecodan is about 4 years old, so quite modern)

ReplyQuote

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

11/12/2022 9:28 am

Posted by: @tufty

↑

Posted by: @brooster

↑

Do you have the MELCloud app?

Hmm, I dont, but Ive just Googled for it. Looks good, but do I need a seperate 'wifi controller' or is it already built in? (The Ecodan is about 4 years old, so quite modern)

you need one of these or similar.

https://les.mitsubishielectric.co.uk/products/controls/advanced-interfaces/mac-567if-advanced-interface

This post was modified 3 years ago by Kev M

ReplyQuote

Tufty

(@tufty)

Estimable Member Member

Joined: 3 years ago

Posts: 54

Topic starter 11/12/2022 9:37 am

@kev-m Thanks. I see theyre selling on ebay for ~£140. 🙄

ReplyQuote

Benseb

(@benseb)

Reputable Member Member

Joined: 3 years ago

Posts: 109

11/12/2022 10:32 am

I didn’t get MMSP installed with mine so unlikely to be worth fitting at this point. Does anyone know if you can hook up an electric meter pulse counter to the FTC5 without also hooking up the heat meter?

just so I know the electric consumption is accurate?

250sqm house. 30kWh Sunsynk/Pylontech battery system. 14kWp solar. Ecodan 14kW. BMW iX.

ReplyQuote

mjr

(@mjr)

Prominent Member Member

Joined: 4 years ago

Posts: 301

11/12/2022 10:43 am

Posted by: @benseb

↑

Does anyone know if you can hook up an electric meter pulse counter to the FTC5 without also hooking up the heat meter?

I think you'd have to hook it up to an electricity meter because the FTC doesn't pulse, as far as I know. Another option may be CT clamps on the supply lead. I've no experience with either but they're used by people on the open energy monitor forums.

ReplyQuote

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

11/12/2022 1:05 pm

Posted by: @benseb

↑

I didn’t get MMSP installed with mine so unlikely to be worth fitting at this point. Does anyone know if you can hook up an electric meter pulse counter to the FTC5 without also hooking up the heat meter?

just so I know the electric consumption is accurate?

This is how you hook up power and electricity meters. They are separate connections so I assume you can do one without the other. T