Forums

Forums
Renewable Heating
Air Source Heat Pum...
Keystone COPs? I'm ...
 
Notifications
Clear all

Keystone COPs? I'm not getting the efficiencies I expected on my Ecodan.

 
Page 10 / 10
Air Source Heat Pumps (ASHPs)
Last Post by SUNandAIR 3 years ago
115 Posts
12 Users
52 Reactions
16.7 K Views
RSS
cathodeRay
 cathodeRay
(@cathoderay)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2130
16/02/2023 9:11 am  

Posted by: @morgan
↑

I assumed it to be obligatory.

Thank God we haven't reached that state of coercive healthism yet, though it has to be said that that blasted pandemic and worse, the authorities response to it, moved us closer to such a terrible state of affairs. For the ordinary housegolder, choice over such things, at least for now, is 100% yours, just as you can choose whether to accept a doctor's treatment or not, you can choose whether to run a Legionella cycle or not. I should mention the situation is different in rental and commercial properties, primarily because of duty of care obligations, but also because commercial properties are inherently more at risk. 

It is not for me to make individual recommendations, but I can certainly point out that the case for domestic hot water Legionella cycles if far from cut and dried. Google it, or start here with the Heat Geek:

https://www.heatgeek.com/hot-water-temperature-scalding-and-legionella/

   


Midea 14kW (for now...) ASHP heating both building and DHW


   
ReplyQuote
cathodeRay
 cathodeRay
(@cathoderay)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2130
16/02/2023 9:17 am  

Posted by: @sunandair
↑

It’s fascinating how how even Heatgeek hovers on saying the risks are very low but,

As you posted that, I was writing a post with a link to his post on Legionella. It is a good post, well researched, considers most eventualities, includes scalds and burns risks, and best of all totally avoids coercive healthism ie he concludes it is a matter of individual choice.

It is extremely dangerous to allow the state to make individual health decisions.   


Midea 14kW (for now...) ASHP heating both building and DHW


   
👍
1
ReplyQuote
SUNandAIR
 SUNandAIR
(@sunandair)
Noble Member Member
Joined: 3 years ago
Posts: 501
16/02/2023 9:26 am  

@cathoderay great points and perfect timing. 👍



   
ReplyQuote



Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 625
16/02/2023 10:59 am  

@cathoderay I'm not going to go into a discussion as to the governments, around the world, reaction to Covid. Nor do I intend a lengthy and rather pointless discussion as to the extreme danger of others looking out for ones health.  My thoughts are based upon my assumption that the Legionella cycle is obligatory as part of the MCS certification and RHI payments being tied into that certification.  I was not addressing the possibilities of government conspiracy to control the masses.  It was a very simple throw away comment/question.


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
SUNandAIR
 SUNandAIR
(@sunandair)
Noble Member Member
Joined: 3 years ago
Posts: 501
16/02/2023 11:53 am  

 

Another way I thought of checking efficiency was how long the DHW reheat took. Since there are less chances of cycling etc.

So I set up a forced DHW reheat at 9.12am today here is the hourly graph reading

5F6C7439 BE87 4B1A 9C37 11B90D675383

Set temp/target was 48c starting at 38c. Coincidentally it appears to have taken 38minutes to reach the target temperature (9.50am). The HP was working on room heating before the test and reverted back to room heating at the end.

HP Ecodan 8.5kw, tank capacity 250L, bespoke construction, deltaT 6, flow rate 13LPM. I guess if I had a MID meter I would also know energy consumption. 

Addendum : I also have a thermistor at the top 300mm of the tank so even though the mid sensor which controls the heat pump read 48c the temperature at the top was 56c. This extra sensor is part of our solar temp difference controller, not part of the Ecodan.



   
ReplyQuote
 william1066
(@william1066)
Reputable Member Member
Joined: 3 years ago
Posts: 206
16/02/2023 1:01 pm  

Posted by: @sunandair
↑

This extra sensor is part of our solar temp difference controller, not part of the Ecodan.

Interesting, do you have more than one temperature sensor input into the solar thermal controller?

My temperature sensor is in the bottom 1/4 of the tank measuring the temperature of the water around the solar coil, and triggering when the dT is 10 or greater.



   
ReplyQuote
SUNandAIR
 SUNandAIR
(@sunandair)
Noble Member Member
Joined: 3 years ago
Posts: 501
16/02/2023 1:22 pm  

@william1066 yes there’s are three sensors in total but only 2 are needed to activate the pump for the solar circuit.

one is mounted in the roof top manifold (LWT) and the other is mounted at the cylinder heat exchanger at the bottom of the tank. When there is a 5c temp difference the controller activates the pump. But the third one is mounted for information purposes at the top of the tank and displays the temperature on the display.

This spare thermostat has been handy to compare Ecodan readings by placing it alongside primary flow and return etc.

(edit: pump activated when 10c difference shows and runs until below 5c or less)



   
👍
1
ReplyQuote
Page 10 / 10
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →