hum/whine from Wilo circulation pump
@richard24738 Good to hear you are getting there now, we have a bedroom that gets the most solar gain in the whole house and we resort to a limiting setting on a Hive PTRV to control this.Good Tweaking, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@toodles @richard24738 and @gary Just reporting back. It became clear that much of the noise was from the primary pump. We have finally had a visit from the installer who removed some debris from the filter, and turned the Wilo primary pump down from 3 (which gave a flow rate above the recommended on the FTC controller) to 2 which has helped a lot. Even better, my other half - who is usually much more confident and technically minded than me - now feels comfortable that we can further experiment without the risk of causing damage. So thank you all for your very helpful input to a pair of newbies.
I have lots more questions about other aspects of the heat pump, but I think they need to go in a new thread!
@grumpidoc Glad to hear that the speed change has improved matters; please ‘enquire within’ in the future as someone on the RHH is almost certainly ‘been there -done that’ and will be able to advise.😊 Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
-
Ideal Logic 10kW Heat Pump Pipes Noisy and Very Expensive to Run
5 months ago
-
Noisy Wilo Circulation Pump on Joule Preplumbed Cylinder
7 months ago
-
Ecodan - optimal external installation?
1 year ago
-
Planning Permission for Air Source Heat Pumps
4 years ago
-
Noise in garden from ASHP
4 years ago
- 22 Forums
- 2,096 Topics
- 46.1 K Posts
- 80 Online
- 3,383 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Mitsubishi cycling while on chilled water output
@jamespa I am not in principle against removing the buf...
By downfield , 7 minutes ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
June proved to be quite respectable for solar productio...
By Toodles , 38 minutes ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 1 hour ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 1 day ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 1 day ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 2 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
Can we have some links to those you're considering plea...
By Transparent , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 3 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 4 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 4 days ago
-
RE: When will heat pumps and install prices come down?
... which of course is impossible because the world mov...
By JamesPa , 4 days ago