Forums

Forums
Renewable Heating
Air Source Heat Pum...
How to program setb...
 
Notifications
Clear all

[Solved] How to program setback (Ecodan 5.0)

 
Page 2 / 2
Air Source Heat Pumps (ASHPs)
Last Post by afarmery 2 years ago
19 Posts
5 Users
5 Reactions
3,488 Views
RSS
Abernyte
 Abernyte
(@abernyte)
Honorable Member Member
Joined: 3 years ago
Posts: 237
09/12/2023 1:51 pm  

 

 

Melcoud1

Does this give you the idea?

Melcoud2

 



   
👍
1
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 627
09/12/2023 2:00 pm  

@abernyte that is excellent.  Very helpful.  Thank you so much.


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 627
09/12/2023 2:12 pm  

@abernyte   Sorry, one more question. When setting for Room, Flow or Curve is it safe to assume that Room is Auto Adapt?


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote



Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 627
09/12/2023 2:18 pm  

Just found this.

 


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
Abernyte
 Abernyte
(@abernyte)
Honorable Member Member
Joined: 3 years ago
Posts: 237
09/12/2023 2:22 pm  

Yeah, room is AA



   
👍
1
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3425
20/02/2024 12:35 pm  

@afarmery did you ever resolve the issues you were battling with? Any updates would be appreciated.

Also, what is the size (kW) of your Ecodan?


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 afarmery
(@afarmery)
Eminent Member Member
Joined: 2 years ago
Posts: 13
Topic starter 20/02/2024 1:15 pm  
  • @editor I didn't resolve the issue really. My system is an Ecodan 5kW.   I understand that it might be possible using Melcloud (but I'd need to buy an Ecodan WiFi adapter).   In the end, I just implement setback manually.   I've got the curve calibrated nicely to give room temps of about 19.5.  The stats are set to 21, as a temp limiter.   When I go to bed I nudge the curve down by 1 or 2 degrees on the FTC6 panel, then nudge it back in the morning.  Power consumption is pretty meagre and I can mostly satisfy it with my solar panels and battery.  


   
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →